MustangWorks.com : Ford Forums - View Single Post

SHaFT7 · 07-16-2001, 12:59 PM

check your switches on the doors arm rests

try pulling one and putting in one from the window rollup/down. all the switches are the same, so they should be interchangeable

that will rule out bad switches, after that test the wiring w/ a voltmeter at the motor, after that, replace the motor

i already replaced one of mine and getting ready to do the next once it fails...

------------------
SHaFTed

91GT, 2 chamber flows, dumps, 70MM BBK TB, K&N conical, Robert Shaw tstat, Hurst short throw, T5, 17" Lexani Roma wheels, 235/40/R17 on front, 255/45/R17 on back, mach1 hood, LX tail lights, bright red!

07-16-2001, 12:59 PM	#5
SHaFT7 Registered Member Join Date: Jul 2000 Location: Lawrence, KS, USA Posts: 169	check your switches on the doors arm rests try pulling one and putting in one from the window rollup/down. all the switches are the same, so they should be interchangeable that will rule out bad switches, after that test the wiring w/ a voltmeter at the motor, after that, replace the motor i already replaced one of mine and getting ready to do the next once it fails... ------------------ SHaFTed 91GT, 2 chamber flows, dumps, 70MM BBK TB, K&N conical, Robert Shaw tstat, Hurst short throw, T5, 17" Lexani Roma wheels, 235/40/R17 on front, 255/45/R17 on back, mach1 hood, LX tail lights, bright red!