© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
02-20-2001, 08:41 PM | #1 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
To all '87-93 GTs w/ power windows
OK , I finally got my '88 GT today. It's fully loaded it looks but the driver window goes all but a 1/4 in. from the top and the passanger doors lock does not work. The fuel guage is stuck on "full".
Are there any easy fixes to any of these problems or all they all going to be a headache to fix? Everything is power equiped. The driver door fix isn't going to be easy.........is it? Does anyone know how to fix any of these problems? Thanks ------------------ '82 GT 351W,BBK shorties, Comp Cam,edelbrock intake 625 cfm carter carb. c-4 tranny w/ pro stick shifter. 4 core radiator Mallory distributor. 3:27 ......................... |
02-20-2001, 08:51 PM | #2 |
Tires Fear Me...
Join Date: Jan 2001
Posts: 867
|
Well, for the door lock I bet the acculator is bad. I am not for sure why the window doesnt roll all the way up. Is the window loose. Check the track for being loose.
------------------ 347 Stroker Motor: Balanced, 30lb Bosch Injectors, Cobra Computer, Cobra Transmission, GT40 Ported and Polished Upper and Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, NGK Plugs, Ram Air, K&N Filter, 77mm Mass Air Unit, FlowMaster Exhaust w/offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums. |
02-20-2001, 10:59 PM | #3 |
Registered Member
Join Date: Feb 1999
Location: Smithton, IL, US
Posts: 215
|
It sounds like the window may be loose on the track. The door lock I would say is most diffently the actuator. I replaced mine with aftermarket ones form a local alarm shop $20.
The cheapest I have found stock replaces were $50 a piece. As for the gas gauge I would try filling it up and running a couple of bottles of injector clean through it ,but you will have to drop the tank most likely. Good luck. |
02-20-2001, 11:39 PM | #4 | ||
He said Member...heh, heh
Join Date: Sep 1999
Location: Jupiter, Florida U.S.A.
Posts: 3,718
|
Quote:
Quote:
As for the window, i have no idea.. I've never had any problems with my window *knock on wood* Check to see that the weather stripping isn't getting in the way! Good luck!! ------------------ Joe! 1988 GT, 167,000 miles!!! 13.71@105mph Check out my listing! Click here! Or my website: www.joe4speed.com 1999 Ninja ZX-6R 10.32@135mph! |
||
02-21-2001, 10:20 AM | #5 |
Registered Member
Join Date: May 1999
Posts: 5,246
|
I've got the same problem with my in tank fuel gauge sending unit. Unfortunately, according to Ford, Checker, Pep Boys, Napa, Champion, Pronto, and a couple other places I've checked, my sending sensor has been dicontinued and I can't get a new one. I'm a little pissed.
|
02-21-2001, 10:35 PM | #6 |
Registered Member
Join Date: Nov 1999
Location: At the north of the Maine
Posts: 177
|
Same advice for the power windows but for the guage. Are you sure that the wire at the bottom of the tach is correctly plug. When i've removed mine for cleaning the glass. The first time i've got the same problem. The needle still in very full position (more than the normal full position) I've push the right large wire plug straight to his position and for me this resolved the problem.
Hope this help ------------------ 88 GT, K&N, Home Made Ram Air, Convertible Engine Mount, Dynomax Super Turbo, 180° thermostat, Energy sway bar bushings, Strut tower brace. *** And Risen from the dead *** My GT My Web Page |
02-22-2001, 04:59 PM | #7 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
White GT, I am not sure what you mean when you say the plug at the bottom of the tach.
What does the tach have to do with the fuel guage? Can you explain a little bit more because my gauge is stuck past full like yours was. ------------------ '82 GT 351W,BBK shorties, Comp Cam,edelbrock intake 625 cfm carter carb. c-4 tranny w/ pro stick shifter. 4 core radiator Mallory distributor. 3:27 ......................... |
02-22-2001, 11:22 PM | #8 |
Registered Member
Join Date: Jul 2000
Location: Lawrence, KS, USA
Posts: 169
|
my passenger window won't go all the way up unless i hold it on the way up, because the glass gets caught on the inside of the upper door frame about 3/4 of the way up (the slant part)
check that ------------------ SHaFTed |
02-23-2001, 12:46 AM | #9 |
Registered Member
Join Date: Aug 2000
Location: Wisconsin
Posts: 879
|
my drivers side window when on the highway if i roll it down then up it wont go all the way up cause the force of the wind from going that speed pushes on the window so it catches on the door frame...have to roll it down then push out on it while its going up
------------------ 1991 GT,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,UPDATE: Just got my Mac long tube headers and Cat-back Future Mods:3.73's,Pro 5.0,Shifter knob,FMS 9mm wires |
02-23-2001, 04:27 PM | #10 |
Registered Member
Join Date: Nov 1999
Location: At the north of the Maine
Posts: 177
|
DEMONGT.
I was tought that this problem was only on my car. It's very funny to know how people can get the same trouble with there cars than us across the north america. Last summer i have removed the door panel on the both side to see what i could solidify and i have put some extra screws on the pilar who's holding the windows. But i don't know if this could fix the problem. My car have 12 years old so this little problem really don't bordering me. It's just a pain some time i'm taking a ride with my friends with their every day washed 96 GT's. Marc ------------------ 88 GT, K&N, Home Made Ram Air, Convertible Engine Mount, Dynomax Super Turbo, 180° thermostat, Energy sway bar bushings, Strut tower brace. *** And Risen from the dead *** My GT My Web Page [This message has been edited by White GT (edited 02-23-2001).] |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Power Windows Stopped Working | AntwaanRandleEL | Windsor Power | 4 | 12-23-2002 03:36 PM |
Power Windows | Lharms | Windsor Power | 3 | 08-14-2001 07:43 PM |
Power Windows | Lharms | Appearance & Detailing | 1 | 08-13-2001 02:33 PM |
power windows and power door locks problems.... | SHaFT7 | Windsor Power | 0 | 04-29-2001 07:06 PM |
Power Windows, help! | Mike 88GT | Blue Oval Lounge | 11 | 04-11-2001 08:37 AM |