Hybrid Mode
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
|
10-04-2001, 08:17 AM
|
#1 |
|
Registered Member
Join Date: Mar 2000
Location: Boston, MA
Posts: 334
|
Price check in aisle 6...
as some of you may know i'm replacing my tranny this winter i have been searching high and low for a T56 that will work in a fox body... well i found one!!! they do make them with the mechanical speedo drive to work in the older/fox mustangs... i found them at a place that sells them brand new for $2100, is that a good price??? he is local so i don't need to have it shipped... and he said that if i can't do the work myself, then he will put it in for $400... now i plan on doing the work myself, so all i should need is a new driveshaft... but i thought his tranny price was really good am i wrong???
Phantom ------------------ CHECK OUT MY MODS My Mustang Loose Cannon Racing Scarzi Machine Works |
|
|
|
10-04-2001, 08:50 AM
|
#2 |
|
or '331 LX Eric'
Join Date: Jan 1999
Location: Columbus, Ohio
Posts: 2,142
|
You may want to talk with D&D Performance about the T56. They have conversion kits and can discuss all that is involved in the swap. Very knowledgable folks. Also, they have very good prices.
Secondly, you will most likely need a different bellhousing, a GM stlye clutch, possibly a new flywheel and a different tranny crossmember. (and a different drive shaft as you stated). If cost is no object, then the T56 sounds like a good idea. However, I think that you will find that the complete conversion is very expensive as compared to a Tremec 3550 or TKO or TKO II conversion. Just my thoughts. Keep us posted on how it all progresses. E ------------------ 1991 5.0 LX Coupe - 38,000 miles 13.17 @ 106.14 mph w/ 2.138 60' |
|
|
|
|
10-04-2001, 11:16 AM
|
#3 |
|
Registered Member
Join Date: Mar 2000
Location: Boston, MA
Posts: 334
|
i have thought about going with a tremec, but they don't have the final gear ratio i am looking for... i want to drop the RPMs as much as i can on the highway, cause i do a ton of highway driving, and i want to run a set of gears, like 3.73s or 4.11s, i'll give them a call though, thanks
Phantom ------------------ Project Bird Turd Loose Cannon Racing Scarzi Machine Works |
|
|
|
|
10-04-2001, 12:02 PM
|
#4 |
|
Junior Member
Join Date: Mar 1999
Location: Ventura, California
Posts: 8,981
|
Dude, aisle 6 is canned vegetables.
Take care ~Chris ------------------ Retired Moderator MustangNet My site: JimPorterRacing RACECAR spelled backwards is RACECAR HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!! |
|
|
|
|
10-04-2001, 02:30 PM
|
#5 | |
|
Registered Member
Join Date: Mar 2000
Location: Springfield, Ma, usa
Posts: 706
|
Quote:
------------------ 89 GT AOD w/ shift kit, B&M rachet shifter, Trickflow intake, Crane (E-type) cam, 70Tb, 75MAF, 1.6 Rockers, Pulleys, MAC headers and H-pipe, Dynomax mufflers, K&N, 3 core radiator, white face gauges, custom interior, cobra R rims. 14.9 at 95.07mph with stock 2.73's. 89LX 2.3 Notch, daily beater! MY89GT |
|
|
|
|
|
10-04-2001, 03:56 PM
|
#6 |
|
Registered Member
Join Date: Mar 2000
Location: Boston, MA
Posts: 334
|
hahaha sorry guys i was just trying to get people to read my post... i said it cause i am looking at 6 speeds... good call on your part...
Phantom ------------------ Project Bird Turd Loose Cannon Racing Scarzi Machine Works |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Carfax | mustangLX92 | Blue Oval Lounge | 1 | 04-30-2003 12:20 AM |
| Check Engine Light Question. | 5ohCOUPE | Windsor Power | 8 | 12-25-2002 12:20 AM |
| How do you price your modified stang when selling it? | Mach 1 | Blue Oval Lounge | 32 | 11-26-2002 01:28 PM |
| 1998 GT Price Check | PonyPride | Modular Madness | 4 | 08-14-2002 12:05 PM |