Bouncing when letting out clutch
 

Right when i am about to release the clutch...there feels like a bouncing somewhere in my rearend. It is really annoying and happens mostly in first gear. I cant tell if it is a suspension prob or mechanical prob.

------------------
Red 1993 Gt- flowmasters,BBK Shortie Headers, BBK Hi-Flow H-Pipe, BBK cold air induction w/K&N, Pro 5.0 shifer, 130 amp alt., underdrives,pioneer cd player and kicker component speakers, Kenwood Excelon amp, 2 12" subs in the hatch,firehawk sz50 all around, timing bumped to 13 deg., ADS Superchip, and mobil 1 oil lubing the 302.

this might be normal, depends how bad it is, i know mine vibrates when i hold it between engage and disengage, but mine is, i think serious need of replacement or adjustment?

But when the self adjuster doent work anymore i dont know what else to do? besides replace$$

ive seen bad motor mounts do that. or even tranny mounts. controle arm bushings can cause that to. it is possible that it is wear in the tranny or diff. first check all your mounts and controle arm bushings in the rear

Mine does it but i know it is some thning in the clutch.. cuz it started right after i HAD A MECHENIC put it in... he told me it was the throw out bearing (it is a ZOOM kevlar) HElp it make me look like i cant drive a 5spd!!!

------------------
PPG Torch Red 95GT, Ported Explorer Intake, E-303 cam, 75mm MAS, BBK Adj. fuel Reg & gauge, BBK Shorty Headers, BBK H-pipe, March Pulleys, 2 Chamber Flowmasters, Kenny Brown 6 point Roll cage, Kenny Brown Panhard Bar, Powerslot Rotors, Eibach Sportline Springs, 180* Thermostat, 1/2 Plenum Spacer, MSD 6AL, MSD Master Blaster, MSD 8.8 Wires, 19# Racing Injectors, AFS 10.5" Cobra R's, Nitto 555's, Eclipse & JL Stereo System... I just sold My K&N, It looks funny with Stock Air Box & filter!!!

I seem to recall that bouncing caused by letting out the clutch was related to an improperly installed pressure plate. Seeing how you just had the clutch replaced...

Sounds like your P.Plate is bad are your flywheel needs to be surfaced.