MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   good idle but............!!!!?? (http://forums.mustangworks.com/showthread.php?t=1807)

HAITHAM 03-21-2001 12:11 AM

good idle but............!!!!??
 
car start fine, idle around 900-1000 rpm.
When I Push clutch in idle comes down, surge & goes off.

New things: PIH kit w/89-93 computer, Prom-M
80mm maf only.



------------------
94 COBRA # 926/5009
TFS track heat heads (ported), Cobra intake (ported), 24# Injectors, 3/8" Phenolic spacer, E303 Cam, TFS 1.7 rr, BBK 1 5/8" headers, BBK 65mm TB, C&L 73mm (not calb. yet), FMS 3.55 ratio, BBK 190 lph fuel pump, Paxton fpr, MSD'S, K&N in fender, March Pulley's, Pro-5 tower power shifter, Autometer shift light (5600), Intellitronix Air/Fuel gauge, Eibach Sportline Springs, Tokico 5-way adjustable, Edelbrock Mufflers w\ 2.5" exhaust system, Clear Marker Lights, Aluminum Gril

[This message has been edited by HAITHAM (edited 03-21-2001).]

HAITHAM 03-21-2001 03:08 AM

ttt

LX XLR8R 03-21-2001 12:25 PM

well first of all the car is still in nutral when you push in the clutch right..what i mean is that wee can rule out a clutch disengaugement problem first

ok only thing that comes to mind is that the car wants to retard the timing too much when the clutch is pushed in..is the compuer an 9al or a 9ap???9ap had less timing pulled out..what is intial timing set at??
basically as i just answered in another post is that the 5speed computer pulls timing out inbetween shifts(when you push in the clutch) becasue 2 many people were blowing t-5's under warrenty..this remedy'd the problem..thats all i can tell you..i cant really pinpoint this problem right now..hope this points you in the right direction

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

[This message has been edited by LX XLR8R (edited 03-21-2001).]


All times are GMT -5. The time now is 07:03 AM.