Need help please ASAP!
 

I installed the drivers side shock in the rear. I bolted down the bottom snug and now I am trying to tighten the nut down on the top but it keeps spinning.The stud is attached to the sleeve of the shock but I have the nut on too tight to hold the sleeve anymore. How do I stop the stud from spinning with the nut??? :eek:

You need to put a wrench or use a adjustable wrench to grab the flat part of the top of the shock, then use another open end wrench to tighten the nut down.

They sell a special socket to hold the shock so you can tighten the nut, but the other way works fine.