Change from 4 Lugs to 5 Lugs
 

How hard would it be to chane my 86 Stang from 4 Lugs to 5 Lugs? Can it be done at home or does someone highly skilled need to do it?

Also, how expensive would it be?

Thanks

I did that same conversion on my 92' All I did was order a ser of slotted rotters for a 95' (they fit on the spindle the same) for your 86' you'll need to get 87-93 spindels to clear bigger rottors (any junkyard) for the back I ordered strange axels (was upgrading anyway) in five lug and got a set of used ranger drums. That shopuld be all you'll need to change.

Hope this helps.

http://www.nomotivation.com/5lug.cfm

try this site it might help

If you have 10 inch rotors, then just get the ranger stuff, they never used bigger than a 10 rotor on the 80 to 90's rangers.

If you have 11 inch rotors, your gonna have to make do with Mark VII rotors, I had mine machined down so that I could bolt on the 5 lug mustang wheels