MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   GT40 Iron heads? (http://forums.mustangworks.com/showthread.php?t=21516)

srv1 03-31-2002 01:59 PM

GT40 Iron heads?
 
where is the best place to get them and the cheapest? i hear alot about the GT40 iron heads. i am interested in a set. any suggestions?

fiveohpatrol 03-31-2002 03:40 PM

well the normal iron GT40 heads are no longer being produced so the best place to find them is either in a classifieds section or your best bet is to scour eBay for them. They're also normally a pretty popular item at swap meets.

If you are willing to buy a new set of headers, the GT40P heads are going for a pretty good price. Summit has started carrying them completely assembled for like $540 a pair. You'll have to get a set of motorsport headers though because the spark plug is at a different angle.

hope this helps
-Drew

avbcon12 03-31-2002 07:12 PM

i got my set of GT-40 heads off the classifieds.... i have since put them in along with a lot of other items and cant beleive the difference!!! DO IT!! you wont regret it...

take care,
adam

4.6l-eatr 03-31-2002 07:27 PM

What year and type of vehicles did they come on? Maybe you could find some still in a car at a junk yard! Just a thought!

avbcon12 03-31-2002 08:09 PM

they came on cobras and lightnings as well as some boats. mine were from a 351 marine application.

the cobra heads im sure are 64cc combustion chambers and the lightnings are i think 65cc or so since they are a 351w motor... the lightning heads also come with 1/2" bolt holes compared to the mustangs 7/16".

hope this helps, it will be a real tough time trying to find them in a junkyard. i tried.

take care,
adam

Unit 5302 03-31-2002 08:26 PM

The GT40 Irons had 65.5cc combustion chambers that will drop your compression ratio from 8.9:1 to 8.75:1. The irons flow a little less than the GT40P's, about 185-190cfm intake, and about 130cfm exhaust.

A solid head, if you pick it up for under $400. Otherwise, getting a new set of GT40P's for $500, then adding the headers is probably the way I would go. Oh, and I'd also have the irons decked for some actual compression.

Tomzilla 04-02-2002 03:32 AM

Quote:

Originally posted by avbcon12
the lightning heads also come with 1/2" bolt holes compared to the mustangs 7/16".




Not completely accurate as my heads came off a 94 Cobra and they had 1/2" bolt holes.:D

PKRWUD 04-02-2002 05:24 AM

FWIW, the GT-40P heads have both smaller exhaust valves and smaller combustion chambers, than the regular GT-40 heads.

Take care,
-Chris

avbcon12 04-02-2002 08:29 AM

http://www.geocities.com/MotorCity/Pit/5755/gt40p.html

adam


All times are GMT -5. The time now is 08:35 AM.