MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   clearance with 1.7's & 2031 (http://forums.mustangworks.com/showthread.php?t=22076)

whiterod 04-10-2002 08:02 AM
clearance with 1.7's & 2031
 
are any of you running the combo of the crane 2031 grind and 1.7's. If not am i going to run into problems with piston to valve clearance. I believe the lift figures are .513/.529. i have the gt-40X heads with the 1.94 intake valve and 1.54 exhaust. Thanks

lx mike 04-10-2002 09:15 AM
The 2031 cam is made for the 1.7 rockers. the lift figures are with the 1.7's. if you have the engine down it would be a good idea to check p-v clearence.


All times are GMT -5. The time now is 02:22 AM.