Roller Rockers, bad?
I'm not too sure if this is suppose to happen, but are roller rockers suppose to move side to side? I started inspection stuff really close today and happen to wiggle the rockers. They make a clicking sound when moved side to side, but are tight and don't have any play up and down, is this normal? I also noticed on the #5 cylinder that the rocker on the exhaust side was hitting the valve cover cause of its movement side to side.
If the rockers are bad and I get knew ones, would 1.72 rockers work on my car with the stock heads and E cam? Thanks all, Craig |
There shouldnt be any side to side movement with the rockers torqued to spec and the lash set.I would stay with 1.6s with your set up but 1.7s wouldnt be a problem either.
|
All times are GMT -5. The time now is 02:15 AM. |