MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   14sec. aod gt (http://forums.mustangworks.com/showthread.php?t=2261)

joey50gt 04-09-2001 09:25 PM

14sec. aod gt
 
Do you guys think my 90gt aod with under drive pullies cold air induction and 3.73's will run 14's??? Im guessing it will run about 14.90's in the 1/4 mile.
Thanks to any answers given a head of time.

slowride90 04-09-2001 10:55 PM

I seen a stock GT with 3.73 gears run a 13.70. But it was a stick.

------------------
3:55s w/posi,Cold Air Induction,Mac headers,Hedderman Off-road H-pipe, MSD Ing.&wires, 65mm T.B. Hurst Short Throw Shifter,front sway bar removed,2 chamber flows,pullys, and Griffen 3 core radiator.. Not to fast Not to Slow, Working on the fast part.

Killercanary 04-09-2001 11:05 PM

What gears were in it to begin with? My cousin dropped 8 tenths with a swap to 4.10's in his '90 SC cougar XR7. My dad's 91 GT 5 speed went 14.6 at 94mph stock, so I think you should definitely run in the upper 14's with those parts- power brake the launch though to get the revs up a little. My dad now runs 13.7's with pulleys, exhaust, 3.55's, and sportsman pro tires.

------------------
95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior
Best ET: 13.83
Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's
Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire

fiveohpatrol 04-10-2001 12:20 AM

it will most likely be high 14s, but to be sure bump your timing and air up your front tires for less rolling resistance, my car went 14.40's for a while with not much more than you've got

------------------
88 Notchback 5.0, 3.73's, Explorer intake, pulleys, Crane 1.7's, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air kit, motorsport wires, MSD coil, upper and lower control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best time- 13.99@99.75, not yet tested times after rocker and intake install

FivepointOH 04-10-2001 01:23 AM

Yeah I think you should be in the 14's. Probably high 14's... i'm guessing 14.8... should have gotten 4:10's. http://www.mustangworks.com/msgboard/smile.gif

------------------
92 AOD GT, K&N, ram air, pulleys, 2 ch. flowmasters, 4:10's, shift kit, 1 5/8 mac longtubes and offroad hpipe 14.249 @ 97.34 mph before the headers and hpipe


All times are GMT -5. The time now is 02:38 AM.