EGR Valve Removal ??
 

Hi

I had to remove my whole EGR valve, due to clearance issues with my N2O setup and Fuel pressure gauge sending unit.

So anyway I made a Block off plate, and plugged the vacuum line, also unplugged the valve.

Do I need to keep the EGR valve plugged in somewhere,

OR, can I just keep the EVP (plastic part on EGR valve) plugged in??

OR Any other ideas. I am trying to avoid a Check Engine Light

Thanx,
LOBE
~~~~~

Remove the EGR
You could build a blockoff.
Then re-install the EGR elsewhere (wires and hoses). OR you could reprogram the chip to understand no EGR :)