C&L 76mm MAF
 

i ran across some extra cash and am planing on upgrading my whole...uhhh...intake air..uhh stuff if you know what i mean..i plan on geting a cobra intake and a 70mm tb..will the 76mm maf with the inlet pipe work ok with my car..also will it work ok with a K&N filtercharger kit?

and who was it on this message board that sold them??

------------------
'91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H,FMS 9mm wires

Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,76mm MAF,70mm tb
ICQ#35670781

Call Dave at JP's Performance for the 76mm C&L (www.jpsperformance.com). It should work with a cone filter as long as you have a sheild to prevent fan wash. I should have mine running in the next 2 weeks, I'll let you know.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

where do i get a sheild...

------------------
'91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H,FMS 9mm wires

Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,76mm MAF,70mm tb
ICQ#35670781

i cant find jp's performances web page?

------------------
'91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H,FMS 9mm wires

Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,76mm MAF,70mm tb
ICQ#35670781

Try: www.jdsperformance.com great prices.

I got mine on group purchase through JD's Performance. Even without the group purchase, it's about the best price on the web. Good guy, too. Very up front and cool to talk to.

I haven't been able to put it on or mock it up yet...I will this weekend.

--nathan

------------------
--silver_pilate

'91 GT, Built 306, Wolverine 1087 cam, ported Windsor Jr. Irons, and all the goodies...click the link to the left to see a full list of my mods...

Tried and True 302 Being Built to Outrun You! heh heh heh...
--Texas Panhandle--
Check out my site

Don't know what I was thinking http://www.mustangworks.com/msgboard/confused.gif It's JD's PERFORMANCE like stated above..Dave is awesome guy

I agree with the above, give JD's a call. IMO I think the 70mm t/b might be too much, you may want to stick with a 65mm. Also, C&L recommends sticking with the stock air filter housing but you would probably be ok with a shield as mentioned above. I don't know if anyone sells one or not but it shouldn't be too hard to fab up.

the reason for the 70 instead of the 65 is cause i heard you dont lose much with the 70 and im planing on in the late future adding a blower and i dont want to have to replace the tb a second time

------------------
'91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H,FMS 9mm wires

Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,76mm MAF,70mm tb
ICQ#35670781

I just installed my C&L 76 mas yesterday. The car idled fine but when i went to drive it, it was sputtering, jerking. I drove it for about 30 minutes to see if maybe the computer needed to relearn. Well anyway the sputtering finally went away but I still had some jerking at 2200-2300 RPMs. I went home and replaced my moroso cold air kit with my stock air box and there is no more jerking.

------------------
Bill Duke
http://i12.yimg.com/12/5a5e8b2f/h/tn...0e/90Coupe.jpg
My Coupe
My Mods
12.68@107.6 N/A

anyone else have any opinions on me geting a 70mm tb?

------------------
'91 GT,91K,T-5,air silencer removed,racing clutch(previous owner put in so dont know what kind),K&N air filter,Aiwa deck,power acoustic amp,2 12" pianeers,Mac long tubes,Cat-back,off road H,FMS 9mm wires

Future Mods:3.73's,Pro 5.0,Shifter knob,E303 cam,cobra intake,76mm MAF,70mm tb
ICQ#35670781

Demon- I say go ahead and get the 70mm since you plan on building the motor in the near future. TH blower will take full advantage of the larger TB. I wish I would have bought the 70mm for my combo. Get a Accufab TB they are awesome, look great and perform great.