wiring my ignition
 

i just converted my car to carbed i have a 6al ignition and a 85 stang disributer how do i wire it up can i do it without the duraspark or do i need one let me know how to wirre it or any websites that would tell me it would be greatly apriicaiated.

From the MSD box:
Heavy Red to battery pos.
Heavy Black to battery neg.
Thin Red to the factory wire that went to the pos coil.
Thin Orange to the pos coil.
Thin Black to the neg coil.
Thin White is to be taped up (you won't use it).

From the Magnetic Pickup cable (connected to the MSD box):
Green wire to the Distributor Purple wire.
Violet wire to the Distributor Orange wire.
(Black wire from Distributor isn't used)

That's it.

Take care,
~Chris

im not to sure but i dont think the wire that went to the coil before is there anymore because i took the wiring harness out that went from the computer to under the hood so were would i run the red wire

It's just a hot wire from the ignition switch; one that has 12 volts whenever the key is in the ON or START position.

Take care,
~Chris