MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Any1 running nitrous on hypereutectic pistons? (http://forums.mustangworks.com/showthread.php?t=2845)

Violent84 04-28-2001 07:23 PM

Any1 running nitrous on hypereutectic pistons?
 

I wouldn't mind running 125 to 150 hit. I heard that most manufacturers of hypereutectic pistons don't recomend over 125 hit. What are you guys running?

thanx,
Violent

------------------
84 GT-350, 2.5" Ram air hood, Centerline Pintails, 5-lug conversion, Recaro's, 140 speedo, 8.8 conversion, 3.73's, Motorsport A/C eliminator, Hurst shifter, ASP pulleys, Eibach pro kit, KYB's, Flowmaster exhaust, Long tubes, Flowtech off road h-pipe, .030 overbore, Extreme Energy 268, Ported stock heads, Pete Jackson Gear drive, Weiand Xcelerator intake, Max Motorsports aluminum rack bushings, 3-core radiator,and more to come!

Mach 1 04-29-2001 03:34 AM

Thousands of people are doing it. Pick up any mustang magazine and start reading the combinations. NOS tech. line told me I could run a 150 hp shot with hyper pistons with no problem. Just tune it conservative, maybe a little rich and watch the timing, should be ok.

------------------
1993 GT/AOD
'93 Mustang GT

fordmanck 04-29-2001 08:44 AM

I've been running a 150 shot on mine for about 1 year and a half. Look at my sig for my times. I run the car very rich, and my timing is set very conservatively. I know have another couple of tenths in it, but I'd rather drive it then blow it up. http://www.mustangworks.com/msgboard/smile.gif

------------------

94GT Mac Headers, BBK Off-road H-pipe, ASP Pulleys, Pro 5.0 Shifter, 4.10 Gear, Weld in subs, Flowmaster 2 chambers, NOS 150 shot. Best ET 12.34 @ 110.
http://www.tribes-universe.com/n202/.../chris2car.jpg

Violent84 05-04-2001 02:15 PM


Thanx guys but tragedy has struck and I'll be replacing the pistons anyway so forgies it'll be.

later,
Violent

------------------
84 GT-350, 2.5" Ram air hood, Centerline Pintails, 5-lug conversion, Recaro's, 140 speedo, 8.8 conversion, 3.73's, Motorsport A/C eliminator, Hurst shifter, ASP pulleys, Eibach pro kit, KYB's, Flowmaster exhaust, Long tubes, Flowtech off road h-pipe, .030 overbore, Extreme Energy 268, Ported stock heads, Pete Jackson Gear drive, Weiand Xcelerator intake, Max Motorsports aluminum rack bushings, 3-core radiator,and more to come!


All times are GMT -5. The time now is 05:35 AM.