how much Power would u guys expect from this combo?
 

ok heres the list:

347 stroker, gt-40 turbo swirl heads, B303 cam, Crane 1.6 roller rockers, performer RPM air-gap intake, full MSD ignition, BBK equal length shorties, pullies, holley 735 carb... whatya guys think :confused:

also what ET's should i expect

330-350 at the wheels.

Your using the GT40Y heads? BAD CHOICE, for a 347 stroker, I would go with a set of TFS TW or AFRS, they flow a lot more than those Y aluminums.

Skyler

Also w/ the B303 switch to a 1.7 rocker.

Skyler

I'd ditch the gt-40 swirls for a set of AFR 185's or the 'new' trick flow high port street heat heads.

Also, what compression ratio are you looking for? That will make alot of difference on the power output.

E

i'm runnin about 10:5.. i already have the motor runnin an it seems to run great.. easily outputs power to about 6200.. i know i coulda went with bigger cam an heads but i got a great deal on the heads an already had the cam.. fordmotorsport said i would have anywhere from 350-370 horse an about 400 ft. lbs.

o an also next year i plan on puttin 100 shot on :D