MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Help! Need Parts (http://forums.mustangworks.com/showthread.php?t=3061)

93LxVert 05-09-2001 07:36 AM

Help! Need Parts
 
Still need to the following items before I can start my AOD to T5 swap. If you have any of these items or know of a good website to get them, please email me. Thanks, Jim.

Email address is: QuePasoJim@aol.com

Pedal Assembly
Nuetral Safety switch
Flywheel
Back up lights harness
rubber transmission mount
clutch fork
clutch cable
quadrant assembly








[This message has been edited by 93LxVert (edited 05-09-2001).]

Capri306 05-09-2001 09:44 AM

I'd pick up a Ford Racing catalog for some of that stuff. DON'T ORDER through Ford Racing unless you wanna pay a zillion times what you can get the same things for at Summit Racing. Good luck. http://www.mustangworks.com/msgboard/smile.gif

------------------
Capri306, Moderator, The Mustang Works Online
1979 Mercury Capri, 5.0L -- C4 -- 2.73
1987 Mustang LX Notch

gray87GT 05-09-2001 11:23 AM

I think D&D Performance has a swap kit. If they don't I am pretty sure they could piece what you need together.

93LxVert 05-09-2001 12:44 PM

Thanks for the info guys, I pickup a new flywheel this morning as well as transmission mount and clutch quadrant. Just about to give D&D a ring and see if they have the adjustable clutch cables. Concerning the nuetral safety switch, I called the ford house and was told I didn't need it. My mechanic says I do...

faststang90 05-14-2001 08:01 PM

i have a 90 coupe that i put a tko in it that safety swicth is no big deal . the only thing i had to do was get the wiring for the 5 speed it plugs in by the door under the carp just follow the wires.Not sure on the newer car but i did not have to change the computer


All times are GMT -5. The time now is 06:45 AM.