MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   how to run my belt? (http://forums.mustangworks.com/showthread.php?t=3209)

RacingBryan 05-21-2001 09:55 PM

how to run my belt?
 
i was wondering on how i should run my belt i have manual steering, no ac, no smog? do i need to buy a older water pump? or which way does it run? thanks everyone

------------------
Bryan Thompson
1986 Lx Coupe
1992 5.0 engine, 2031 cam,trickflow intake, 24lbs injectors, 75mm promass air, crane 1.7 roller rockers, mac- equal headers, off-road hpipe, cat back exhaust, 3.55's w/disk, hurst shifter, t-5, NOS sportsman fogger setup w/8 wet foggers in a 1" spacer between upper and lower.

Mike_W 05-22-2001 12:27 PM

I put the power steering back on, but I had the same set up before. I drilled another hole in the alternater bracket, so I could rotate the tensioner, so the tensioner would be pulling up on belt, instead of pushing down. Hardly any belt surface was touching water pump, but it was good enough, plus the belt was extremly short.

------------------
90LX, T-5, Vortech V2-SQ, Holley, Twisted Wedge Stage1, X-303


All times are GMT -5. The time now is 05:58 PM.