Speed Density Cobra?
 

Hey all.

Right now, I'm running my '88 with stock speed density, and the stock cam. I want to continue to run those same two components well into the 12's in the spring. But, I also have '94 Cobra heads, along with a Cobra upper and lower, that I'd like to install on the car this winter. Can I run these components on speed density and a stock cam? If not, Who wants to buy '94 Cobra heads, along with a Cobra upper and lower...!

Thanks!

You can run them no problem.

Easy money,

Okay, I was concerned about the additional flow for the Cobra stuff being handled by the speed density components.

Thanx

I have way more than what you want to do done to my speed density engine and it runs like a top.

Just buy a FPR I suggest the Aeromotive one. You will probably have to up the pressure a little bit,

dont worry about it you will be ok... I'm running 70mm tb gt40x heads b303 cam.....umm some other stuff they say you cant run with sd and it still idles decent

later

So anyway,
I guess to summarize,

I shouldn't have a problem running my stock cam and stock computer with Cobra heads and intakes on my SD. I'm running 13.27 right now with stock everything with the exception of 1.7 roller rockers right now. (I've got a good stock cam...!)

Thanx again!

those are some impressive times keep it up. What do you have done to the car right now?