RAnger to mustang rear axle
 

What size rearend does a Ranger have? If it has an 8.8 what years will bolt to a 1994 mustang?

they have 7.5 rear.

The 4.0 ranger has a 8.8 in it. I'm not sure if it will fit though, i think it is a little different. It's offset or something because you can use two right ranger axles in a mustang 8.8, but the left ones will not work.

Re: RAnger to mustang rear axle
 

All Rangers have 7.5's unless it came with a 4.0 then it is an 8.8. none of these axles will work for your SN95. The only axles that will work are Stangs 94 and up. Also, does yours have ABS? The ranger axles are norrower. What are you trying to do? do you need a replacement? If you need a housing, the TBird Turbo coupes will work and 93 Cobra's will work. Just change the axles from a SN95 to those housings. SVO housings may work but the axleshafts will not. They are longer than the SN95's.

I have a 7.5" right now. I am taking a couple of guys tips from here and taking an 8.8 housing and putting an 31 spline Aurburn pro diff, with 31 spine axles and 3.73 gears with the svo cover. Dropping a 351W into my car with in the year I hope need some strength.