Ford Performance Soultions cam? HELP!
 

Does anyone know anything about FPS (Ford Performance Solutions ) camshafts? They have a model 4017 that has an INTAKE LIFT of .493 and the EXHAUST LIFT at .510. The DURATION @.50 is INTAKE 212 and EXHAUST 222. The LOBE CENTER is 112. I am keeping this build somewhat streetable. I have a ported stock intake (lower) and ported E7TE stockers. I am running 9:1 with .30 over Sealed Power hyper slugs. I am not familiar with this brand. There site has respectible prices.

If you use the Google search engine and type in FPS cams, you will ses the site.

Some have said this is not a good choice for my setup. What is? I mean the e303 causes sureges, everything else on up the list from Ford is to much for my setup. The other manufactures all get bad raps. Its bullshit that everyone can not decide what works best for a mostly stock car. I do not like the sound of the stock cam and just want something a little more that stock. I have heard no more that .500 lift for a stocker. Is this true? What the hell about duration? Some companys show the area I feel I am in at this duration of the FPS cam. HELP?

that cam actually seems pretty good for a stocker, its probably going to have a little lope in the idle but nothing annoying.
i have never heard of the company, is it actually their cam or is it someone elses cam that they are selling?

I have been told Isky grinds these for them.

isky is a good cam manufacturer, i would say throw it in

those specs are very close to the TFS stage 1 cam..

Good idle, strong midrange power. Aftermarket intake, heads, and headers recommended. Requires modified mass airflow. Compression ratio: 9:1 to 10.5:1.

221 intake/225 exhaust .499 in./.510 in. 112

not sure how much that other cam costs but the stage one is about 140.
-as