MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Better sound and speed (http://forums.mustangworks.com/showthread.php?t=40093)

mak375 11-07-2003 03:31 PM

Better sound and speed
 
I have a little extra cash and i was looking at getting another mod for my 94 cobra. I would like to make it sound better. Not nessisarily louder, but that would be nice too.
I dont know what else to do now that i have finished the exhaust.

If nothing else will really help my sound, I could use a speed mod. A couple of my friends are getting these new ricey turbo charged little 4 bangers, like the WRX and the lancer EVO. I'd like to be able to smoke them by a good bit, not just a narrow win.

I was thinking maybe a 75 dry NOS shot might do the trick, but im still looking for other options.

I have about 3k at most to spend on purchase AND install. I have done some small things myself like pulleys but anything more indepth than that i prefer to let a professional handel it.

mak375 11-07-2003 03:33 PM

its not on my sig but i had my intake ported and polished, and i have a set of MT drag rads on backorder.

stanger9219 11-08-2003 12:05 AM

Get new heads and a better cam. Im goin for Trick Flow twisted wedge heads. The heads cost around $1000 or more and an E303 cam will run about $200...but if you find a good shop you should have enough $ to get it installed. You'll be A LOT faster and you car will sound hella better with the cam.

stang_racer20 11-08-2003 01:17 AM

get a nice intake manifold to go with that and your set. You will be more than pleased! All for about $1800 in parts w/ shipping. Install should cost no more than $500 for the h/c/i combo, so you'll still have a couple hundred left over!

stanger9219 11-08-2003 11:53 PM

hey stang racer...where can you get that combo for that cheap...i havent seen that many sites or anything but the ones i have seen have cost almost three grand for all three (h/c/i) So what I'm asking is what is the best and cheapest site to buy from?

stang_racer20 11-09-2003 04:40 AM

i went through summit for a ton of my parts. well say you wanted to go trick flow for brand. through summit, twisted wedge heads are $1000, track heat intake is $450 and stage 2 cam is $150 and a good set of rockers for like $200 = $1800.

stanger9219 11-09-2003 02:15 PM

Alright thanks man...i actually do wanna go with Trick FLow so that helped a lot.

stang_racer20 11-09-2003 09:22 PM

glad to be of help. hit me up anytime.

rwhite65 11-10-2003 05:34 AM

another vote for the heads, cam, intake, and roller rockers. You should be very pleased with the results.


All times are GMT -5. The time now is 07:29 AM.