Trick-Flow and e303 need rocker help.
 

I'm thinking about going with the trick flow heads and my e303 cam. My problem is I was talking with Anderson today and they told me that trick doesn't warranty there head with Harland sharp rockers? Harland is one of the best rockers? They also said I would have P/V problems with the 1.7 rockers? I thought that some people here were running this combo. Any info would be great. The spec for the rockers are 1.73. Thanks for the help.

------------------
Check my site for mod
www.fordmustanggt.com

You better stick w/ 1.6's.
That sounds waaay to close w/ 1.73's

------------------
'88 coupe...stock as a rock.
Check out http://www.burnouts.stangnet.com

11's coming soon!!!!
Heads,intake and cam are all here

Isn't there some guys running this combo on this board.

[This message has been edited by 92Rustang (edited 06-29-2001).]

Check it with clay, but it should work fine. 1.7 rockers will bring your lift up to .529, and 1.73's will put it at .538. It's hard to get a straight answer from Trick Flow, but the general concensus there is that up to .540 lift is safe. You would be a fool to do it without checking it with clay first, no matter what anybody tells you.

Take care
~Chris

------------------
Retired Moderator
MustangNet
My site: JimPorterRacing
RACECAR spelled backwards is RACECAR

HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!!