MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)

- Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)

- - trans cooler (http://forums.mustangworks.com/showthread.php?t=4143)

What is a good type of trans cooler and easy to install? Secondly, which line is which? Top one flowing to the radiator? Thanks for the help.

I installed a B&M supercooler. Went well except for one thing. The flare fittings on the radiator aren't standard. You'll need to get some different fittings for the female side. The stock ones are extra deep and the hose barb fitting will not seal.

I don't remember right now which line is which but the instructions tell you.

I used the zip tie things thru the radiator to attach it. That was fast and easy but I'm not wild about the restricted air to the radiator now. I'm thinking of moving it away from the radiator.

------------------
'92 GT conv.
TFS heads, GT40, Powerdyne 9#, AOD, 3.73
My Mustang Page

Usually, factory radiator trans cooler fittings are 5/16 inverted flare.

Thanks for the info.