MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   fender removal? (http://forums.mustangworks.com/showthread.php?t=44704)

whitepony 11-11-2004 09:21 AM

fender removal?
 
ok so its getting cold up here in canada and i wil be putting my car away soon. and over the winter i want take my fenders off JUST my fenders can i do that without taking my front nose off? i have a gt so i know the side groundfx's will need to come off.

thanks
mike

jameasun 11-16-2004 06:06 PM

Re: fender removal?
 
basically to take off the fenders the nose has to come off.

Dark_5.0 11-17-2004 09:43 AM

Re: fender removal?
 
I remove the fenders and front end all in one piece. Just take everything loose and have a buddy get on one side and you get on the other and the entire front end will slide off.

I have mine off right now to repair my cowl panel. ;)

whitepony 11-17-2004 11:17 AM

Re: fender removal?
 
ok but what holds the front clip on??

by the looks of things you can just take the fenders off but i might just take the hole front clip off if its faster??

the reason i want the fenders off is so that i can sand blast my frame up front cuz i seen some rust there just started so i want to get it befor it gets worse

thanks
mike

Dark_5.0 11-17-2004 12:39 PM

Re: fender removal?
 
Quote:

Originally Posted by whitepony
ok but what holds the front clip on??

by the looks of things you can just take the fenders off but i might just take the hole front clip off if its faster??

the reason i want the fenders off is so that i can sand blast my frame up front cuz i seen some rust there just started so i want to get it befor it gets worse

thanks
mike

It is way faster to remove the entire front clip. There is a total of 16 to 18 bolts to remove. Then you have to unplug the headlights etc... and it will slide right off.

Not to mention when you do it this way you have alot less to line up when you reinstall it.

whitepony 11-17-2004 11:51 PM

Re: fender removal?
 
ok so i just take the fender bolts out (BUT NOT THE ONES TO THE FRONT NOSE) and then are there anyto the front clip that must come off the frame?? if so where?

thanks DARK

mike

~The Jester~ 11-18-2004 07:59 AM

Re: fender removal?
 
Dark 5.0 is right, WAY easier to take off the whole front clip. Fenders bolt to the frame in the door jambs (mark where these are before you unbolt them for reassembly line up), there's a brace in front of the wheels, unplug the wiring harnesses for the headlight/parking lights. It's been a while since I've done it, but I BELIEVE the front facia is bolted on to the header panel, and possibly a couple rivets. There are also a few small bolts on the bottom side of the nose. Take all that stuff loose, and then see what's still holding you up. Not a bad job at all, and reassembly is a breeze, almost nothing to line up! :D

whitepony 11-22-2004 05:59 PM

Re: fender removal?
 
ok i have the fenderbolts out ands the 4 bolts at the front with that little L braket's now there are 4 or 5 plastic rivits at the front they dont come off do they? and there is to bumper mounts do i neeed to take the bolt out of that or no??

thanks
mike

~The Jester~ 11-23-2004 12:21 PM

Re: fender removal?
 
The actual bumper stays on the car. Plastic rivets will come out, but you'll probably need to replace them. Check for a bunch of small bolts with big flat washers under the front too.

drudis 12-05-2004 08:43 PM

Re: fender removal?
 
Here is a photo of the front clip removed.
(never mind my dog "keeping me company" sleeping while I work).

http://www.dariusrudis.com/junk/Meshka06_Mustang.jpg


All times are GMT -5. The time now is 03:26 PM.