MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   G- tech (http://forums.mustangworks.com/showthread.php?t=4496)

K.C. 5.0 07-14-2001 08:45 AM

G- tech
 
Does anyone know how acurate these things are?
I borrowed one from a friend and I've been running low 14's most of the time. But I have ran a 13.4 and a few 13.7's.
My tires suck and the time I ran the 13.4 it felt like I launched almost perfect. Has anyone ever compared it at the track?

------------------
95gt 80k, MSD 6AL, MSD coil, pulleys, fpr, cold air kit, off road h-pipe, flowmasters, 3.73, fluidampener, 9mm wires, mega bite jr lowers, kennybrown subframe connectors, edelbrock performer intake, 70mm TB, Aluminum Driveshaft, Tri-Ax shifter.

SaleenGTS 07-14-2001 01:57 PM

13.4 is too fast....13.7 is more like it.
If you miss the level by much, it will throw it off big time. Mph is higher always on G-Tech.

------------------
Dustin
Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's

12.3@119

http://www.mustangworks.com/rides/pictures/Listing1549-slot1.jpg

dinomite 07-14-2001 03:52 PM

I believe that the g-tech is pretty accurate as far as the ET goes, but on MPH its a little higher, because it measures the velocity (speed) at the end of the run, whereas the track measures how quickly you cover the last 60 ft of the track.

K.C. 5.0 07-15-2001 04:03 AM

You are probably right. I went to the track today and I had a pass were I ran a 14.6 and the g-tech said I ran a 13.9 then I ran a 14.4 and it said I ran a 15.10. But like you said I don't think I had it perfectlly level.

------------------
95gt 80k, MSD 6AL, MSD coil, pulleys, fpr, cold air kit, off road h-pipe, flowmasters, 3.73, fluidampener, 9mm wires, mega bite jr lowers, kennybrown subframe connectors, edelbrock performer intake, 70mm TB, Aluminum Driveshaft, Tri-Ax shifter.

jimberg 07-15-2001 12:06 PM

I think you need a better mount for it to work properly. It never really snugs up to the window like it should. That's the biggest flaw it has. I'm trying to fabricate a better one.

------------------
351W 89 Mustang GT Convertible

LX NCH 50 07-16-2001 04:11 PM

I think mounting it is the biggest problem it has. I have used my one at the track and it has someitmes matched my times, but as others have said mph is always off. I could care less if it is accurate, as long as it gives me #s that say I am faster then when I did my mod, it makes me happy http://www.mustangworks.com/msgboard/smile.gif


All times are GMT -5. The time now is 12:37 PM.