Well I took my 302 out and this is why my motor took a crap
 

This is what caused my 302 to start running like crap. Broken rings. When I pulled the oil pan off I found them in the bottom of the pan. It tore the piston and cylinder wall up.
http://memimage.cardomain.net/member...98_76_full.jpg
There is the old motor and trans.
http://memimage.cardomain.net/member...98_74_full.jpg

Instead of redoing the 302. My boss told me he'll sell me this 351W that I put together a couple months earlier. I told him yea. I've been getting all the parts this past week to swap the 351 in my mustang. I also got my tranny rebuilt.
http://memimage.cardomain.net/member...98_81_full.jpg

Here is the 351W.
http://memimage.cardomain.net/member...98_80_full.jpg
http://memimage.cardomain.net/member...98_79_full.jpg

Here's the intake that's going on it. I just got in the mail yesterday.
http://memimage.cardomain.net/member...98_77_full.jpg

Here is my trans already to go back in. I painted and clear coated it.
http://memimage.cardomain.net/member...98_78_full.jpg

Here the motor coming together
http://memimage.cardomain.net/member...98_84_full.jpg
http://memimage.cardomain.net/member...98_86_full.jpg
http://memimage.cardomain.net/member...98_85_full.jpg

Re: Well I took my 302 out and this is why my motor took a crap
 

Looking good.

Re: Well I took my 302 out and this is why my motor took a crap
 

i am jealous....351........cubes
Ryan

Re: Well I took my 302 out and this is why my motor took a crap
 

Looks good.

Re: Well I took my 302 out and this is why my motor took a crap
 

That is absolutely beautiful. :cool:
-Ryan

Re: Well I took my 302 out and this is why my motor took a crap
 

awesome, u must be dying to fire her up......

Re: Well I took my 302 out and this is why my motor took a crap
 

Very nice. Bead blasted and cleared aluminum and pulley!

Re: Well I took my 302 out and this is why my motor took a crap
 

I didn't bead blast it because it was new. But I just clear coated it. I also did the water pump if you can tell. I'm going to bead blast the new intake on my Falcon and clear coat it. I like that look.

Re: Well I took my 302 out and this is why my motor took a crap
 

Where is the turbo??? ;)

Re: Well I took my 302 out and this is why my motor took a crap
 

Uh Ackbar, that doesn't looik like a 93 GT to me!

And speak to my .270 BDL about tryanny over me :D

Re: Well I took my 302 out and this is why my motor took a crap
 

man, thats soo ghey. you should drop a sweet junkyard 2.3 in that baby! looks like that's what it used to be based on the brake booster i see in your pics...lol. nah im jk, thats badass. i like.

Re: Well I took my 302 out and this is why my motor took a crap
 

Well this is what a I got done so far. I don't have time to really work on it so it's taking me longer then I wanted it to. I am wanting on a new starter because my power stud broke off. So I couldn't put the drive side headers in. I'm waiting on a distributor. I have to run new fuel line because I'm putting a bigger fuel pump. I bought a throttle cable from lokar I'm waitnig for that to come in so I can install it.
http://memimage.cardomain.net/member...98_88_full.jpg
http://memimage.cardomain.net/member...98_89_full.jpg
http://memimage.cardomain.net/member...98_90_full.jpg
http://memimage.cardomain.net/member...98_91_full.jpg
http://memimage.cardomain.net/member...98_92_full.jpg
http://memimage.cardomain.net/member...98_93_full.jpg

Re: Well I took my 302 out and this is why my motor took a crap
 

Well, It's pretty much done. Saturday I ran my fuel line and installed my Locar throttle cable. Then I fired it up and did a few burnout's. My dad buddy where we where working on my car has 5 acre of land and a long drive way. So I made a pass down his drive way. I had my dad filming but he didn't get all the cool stuff I guess he forgot to hit record. The only thing let to do is install my exhaust. I had shorty headers last time now I have long tube so I'm just going to take it to the guy that does my exhaust and get him to cut what I have and make it fit.
http://memimage.cardomain.net/member...8_101_full.jpg
http://memimage.cardomain.net/member...98_99_full.jpg
http://memimage.cardomain.net/member...98_98_full.jpg
http://memimage.cardomain.net/member...8_100_full.jpg
http://memimage.cardomain.net/member...98_97_full.jpg

Re: Well I took my 302 out and this is why my motor took a crap
 

Nice work!

Re: Well I took my 302 out and this is why my motor took a crap
 

That is nice work. I'm a confirmed EFI convert though even though I hovered over carbs for the better part of 40 years.

Re: Well I took my 302 out and this is why my motor took a crap
 

I got my exhaust put on today. All he had to do is shorten the pipe because I had shorties with the 302. So it's pretty much drivable but I still have to fix a few thing before I start really driving it.
http://memimage.cardomain.net/member...8_102_full.jpg

http://memimage.cardomain.net/member...8_103_full.jpg