MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Taillight lense Q (http://forums.mustangworks.com/showthread.php?t=45371)

KiltedBanshees93GT 02-11-2005 12:27 PM
Taillight lense Q
 
When I was getting the 93 back on the road, I splurged and got her new headlight/clear corner set and LX rear lenses. Since I swapped them out, the rear lenses keep trying to come off the housing. I used the supplied "roll o' sticky gunk" and the new clips, but it didnt seem to help. Currently, they're attached with "pit crew" adhesive, but it looks like crap, still partially loose, (1/2 inch space on the top between the lense and housing, with dried adhesive connecting them)
I've also tried RVT etc. Any suggestions?

J

flyin 5.8 02-12-2005 08:56 AM
Re: Taillight lense Q
 
I used clear silicone on mine. Ran a bead in the slot the lens fits in and then wraped quack tape around them overnight so they could set up. Been this way about 6 months now, no problems. :D

HiFlow5 0 02-14-2005 08:14 AM
Re: Taillight lense Q
 
Quote:
Originally Posted by flyin 5.8
I used clear silicone on mine. Ran a bead in the slot the lens fits in and then wraped quack tape around them overnight so they could set up. Been this way about 6 months now, no problems. :D
That's the same thing I did, except fort he duct tape. Worked fine.

KiltedBanshees93GT 02-16-2005 08:17 AM
Re: Taillight lense Q
 
Thanks guys, I'll give that a shot as soon as I have enough time to let them dry :rolleyes:
BTW, Did you use the clips too, or just trash em?


All times are GMT -5. The time now is 04:33 PM.