MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   new heads (http://forums.mustangworks.com/showthread.php?t=49903)

mipedley 07-26-2007 10:28 PM
new heads
 
i am looking in to getting set of trick flow high port heads for my car.
i am currently runing and f cam with gt 40p heads and atrick flow intake.
but what i want to know is when i buy these new heads can i use the same push rod or should i get new ones? and i should get new ones what length the same or what?

thanks mike

rwhite65 07-28-2007 08:45 PM
Re: new heads
 
Quote:
Originally Posted by mipedley (Post 331883)
i am looking in to getting set of trick flow high port heads for my car.
i am currently runing and f cam with gt 40p heads and atrick flow intake.
but what i want to know is when i buy these new heads can i use the same push rod or should i get new ones? and i should get new ones what length the same or what?

thanks mike

Have you checked Trick Flows Website? They usually have a size they recommend. Not sure what the Gt 40 heads require, but if they are not hardened, you are gonna need a new set for the TF heads.

USMC302 07-30-2007 06:47 PM
Re: new heads
 
I've got a set of the Cast Iron high ports. Mildly ported as well. They are on a moch-up motor right now for an 8 sec cobra in New Orleans, but let me know if your interested.


All times are GMT -5. The time now is 10:12 AM.