will it clear?
 

I've got heads with 1.94"/1.60" valves milled to 60cc with 1.6 rockers. I want to put a B cam in it and I am wondering if I am going to have any clearance problems. Any help would be appreciated.

Thanks

if its all apart, check it the usual way , with the heads on(not torqued down) use the stock cam and clay the pistons, check for how much clearance and add the difference, which should be about .036. you want .100 clearance. based on your specs, there shouldnt be a problem with that cam.

Nothing's apart but I've got all the goods. Thanks for your help.