How big of valves can I fit in stock heads?
 

I have ported the stock heads And I might put larger Valves in it, How big can I go and How much for it. I am going to a shop Wed. I went to the shop and the guy went home all ready. Would it be Under $1,000???? That is all I will go could can I get any thing done foe that??

------------------
14.28@103.0 on a G-Tech Engine: Steal Mounts, Under drive pulleys, K&N, Home ported Lower Intake, No power steering, No A/C
Drive Train: 3.55, World Class T-5,
NOW it is time for Real power STUFF I Have and will put on after I get everthing: Mac cold intake, 70MM TB, Valve covers (COOL ONES)255 Fuel pump NOS Dry 75HP.
Next to get: Rocker Arms,Cam,TFS Heads,Injectors 24,Holley Intake, What might I need???See It at <A HREF="http://www.computerconquest.com" TARGET=_blank>www.computerconq

How much HP could I make?

I think you can get a 1.90/1.54 set in there on stock heads.

I really can't understand why you'd want to put all that into them. Even totally maxxed out they will only flow as good as stage 1 GT-40 irons or Gt-40ps at stage 1.

Why spend a grand on stock heads? Shed 50 pounds and pick up a set of aluminums that will outflow ported stockers.

------------------
Todd
1995 GT/T-5
Pulleys; 65 mm TB; Flowmaster cat-back; Mac off road H-pipe; FMS aluminum driveshaft; short-throw shifter; HD clutch; Cobra R's; Cobra front and wing

Will it put out 320HP??? How much HP??

They should be capable when maxxed out of getting you 320hp, yes.

i've seen ported stockers go pretty fast, but some gt-40's would be just as much flow, and probaly not much more cash, unless this guy gives you a deal, friend was running 108 traps with ported stockers and cam 1.7 rr's, good luck.

Well i am getting a set of AFR's 165 I might still have the stock head done Later Tahnks guys