Trunk Lid help????
 

i have a 92 LX notchback (trunk) i wanted to know how to install the bars that go across the trunk to hold the trunk lid up when it is open???

please help

It should be in you local hanes manual but they are bendable flexable bars that basically put a spring loaded effect on the trunk, tey will have to be twisted and put inside the supplied hooks on each side of the trunk there should be three slots of adjustment. The bar's ends that are bent should end up facing you installed. Good Luck




------------------
88LX NOTCH 5.0, TFS Twisted Wedge Aluminum heads, 2.02 1.60 valves, BBK shorties unequal 1 5/8, off road H-pipe, Flowmasters, Drag lites, custom grind cam, solid motormounts, Aluminum Driveshaft, BBK springs, lakewood 90/10 50/50 shocks, BBK upper and lower control arms, 4.10 gears, centerforce DF clutch, adjustable BBK clutch cable with aluminum quadrant, Billet Steel flywheel, 70mm Acufab Throttle Body,MAC cold fender mount induction, K&N, 3 core radiator, flex-lite-fan, custom hardened push-