Got The Rest Of My Exhaust, But How Do I Put On The H-Pipe???
 

Well, Now I Have Gathered A Complete Exhaust, But I Need To Know If I Need A Hoist To Put On My Off Road H Pipe?
Do I Need To Jack The Motor Up???

I Havnt Put On The Headers Yet, But Would LLike To Soon, But THe Installation Time Is My Main Problem...

I Got My Exhaust For A Sweet Deal
BBK 1-5/8" Equal Shortys $40 (Used)
2.5" Off Road H Pipe $50 (Used)
Dynomax Super Turbo Cat-Back $305 (New)
So It Adds Up To About $400 Canadian Dollars.

Think I Could Hit A 14.2 Or Better Once The Exhaust Is All On??

Oh Yeah, I Am Putting On Some New Tires Soon....
http://www.mustangworks.com/cgi-bin/...dia.cgi?1323+3

------------------
1988 Mustang GT, T-5
3.08's, No Smog Pump (Shorty Belt), Dynomax 2.5" Super Turbo Cat-Back, K&N Air Filter (Stock Air Box), Removed Air Silencer
14.691 @ 94.7 With A 2.24 60ft.

1988 Mustang GT

I Dont Know How To Add Images, So Check My Newest Picture Out... http://www.mustangworks.com/cgi-bin/...dia.cgi?1323+3

should be ez need the car jacked up and get under it and put it on.

------------------
Engine: steel mounts, Under drive pulleys, K&N, Home ported Lower Intake, No power steering, No A/C
Drive Train: 3.55, T-5z,

Real power STUFF I Have and will put some time: Mac cold intake, 70MM TB, Valve covers (COOL ONES)255 Fuel pump NOS Dry 75HP, AFR 165 58cc, GT-40 Intake.
Next to get: Rocker Arms,Cam,Injectors 24, What might I need???See It at www.computerconquest.com

Bow Tie:
Where'd you find those parts that cheap!?

I had to jack the motor up on the passenger side to get that header on. I could not get it between the strut tower and the motor without doing so. I have stock motor mounts on my 'vert which allowed for a little play. The driver side bolted up without jacking it up. And I had to use Fel-Pro 1416 (could be 1614) header gaskets. The stock one's are dwarfed by the bigger headers! By the way, did you port out the headers? Mine had alot of welding to Dremel out.

The h-pipe, for me, was pretty easy. I had the help of 3 other buds and we installed it all where we work at Tires Plus. I had to put the o2 sensors on last after bolting it up. The h-pipe hangers had to be buzzed off. I didn't have to jack the motor up for it either.

When you are doing the cat-back, the higher you can get the car up the better. Especially if the tailpipes are all one piece.

After my install with my 2.73's I REALLY notice the xtra power after 3k rpm's

------------------
'91 LX convertible , T-5,Centerforce Dual Friction, FMS adjustable cable w/quadrant, ported/polished/milled E7 heads, 1.6rr, 1.94/1.60 stainless valves, BBK 1 5/8" equal length shorties, 2 1/2" off road H-pipe, Summit 2 1/2" catback, March Performance Pulleys and A/C Eliminator

When I put my H-Pipe on all I had to do was drive up onto a set of ramps. It only took about an hour with 4 guys(one on each corner of the H-Pipe). It was relly easy. Also make sure to let your car cool for a while because it'll be hot.

------------------
3.55 gears,posi,mac 1 5/8 shorties,off-road h-pipe,w/flowmasters,bbk 65mm throttle body,frpp aluminum driveshaft,frpp b303 cam,hurst short throw shifter.

caliplaya650, i got the cheep stuff from a guy at work (no there not stolen)

i have a double block of mechanics on wednesday at school, so ill try to get it on then, could i just put the car up on jackstands since a hoist might not be available for my car?

NO ONE LOOKED AT MY PICTURE???
my tires look like slicks now, and doing 50 in the rain, i can feel the *** end slide out while just driving normally...
new tires.... this week....

------------------
1988 Mustang GT, T-5
3.08's, No Smog Pump (Shorty Belt), Dynomax 2.5" Super Turbo Cat-Back, K&N Air Filter (Stock Air Box), Removed Air Silencer
14.691 @ 94.7 With A 2.24 60ft.

1988 Mustang GT

Bow tie if u come across an x pipe can u give me hollar!

BowTieEater5Liter,

Ooops, my bad, you gotta sweet ride there! You must get alot of compliments on it. After the exhaust, you will have to beat the girls off with an ugly stick!

I jacked the front end up about a foot, got under the car and pulled the h-pipe on top of me and installed it alone. its really not that hard. Install the 02's after you bolt up the h-pipe.

Nice picture, those exhaust leaks really suck when its cold outside LOL.

------------------
90 GT, Red with white racing stripes. Did the AOD-T5 swap, Steeda Tri-Ax shifter, Factory sun roof and armrest delete, Pace setter off-road H pipe, Flows, Ford Racing aluminim driveshaft, Auto Meter Sport Comp Silver tach, and a K&N filter.