Piston to Valve Clearance question
 

Will the Motorsports F-303 cam work with my stock pistons etc and Trick Flow heads? I dont wanna order everything and find out I have clearance problems. thanks

You won't have any clearance problem with 1.6's. The twisted wedge heads have recessed valves, so it actually gives you more clearance. I speak from experience

Rob

thanks bro http://www.mustangworks.com/interact...oard/smile.gif

------------------
Matt
88 LX hatch 44K
3.73,pro 5.0,2 chamb. flows, off road h pipe by MAC, Hooker shorty Headers, Kirban Adjustable fuel press. regulator, asp pulleys, 65MM edelbrock TB,Steeda lower and Motorsport Upper control arms.
14.3@99mph 2.1 60' on a F'ed up tranny.

I believe the magic number is 513* total lift.
under that you are ok..over you fly-cut



------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.webprovider.com