Heads and cam
 

Ok, here is the deal. I am craving power and have money to spend.

I ended up selling my TW's to the guy who bought my car, but agreed to keep my Intake.

I want a new set of heads. I can get TFS TW's for $900 assembled from Saleen.

I can get the new AFR's 165 or 185cc's for $1400 assembled. They flow pretty close to the TFS's, but the 185's have more flow capability. I will be porting them soon, so which ones do you guys think are the best?

Now cams. I am a little rusty on the bumpsticks, what would be a good one to get? I want around a .530-.550, so flycutting will be out of the question.

Thanks guys.



------------------
Dustin
1993 Cobra #1926

Bassani Full lengths,Bassani short X-pipe, American thunder Cat back, 3.55's. More to come...

Comp Cams Xtreme Energy cams are a favorite of mine. I like the AFR 165s on a near-stock engine. If street/strip is more your thing then get the 185s. Also, the cam will depend a lot on your intentions with the car. You could stick with the same lift but go with more duration and a different LSA and have a totally different cam. It all comes down to usage.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s