Pulled codes 19 & 22...

gt93mustang · 01-29-2001, 07:03 PM

My check engine light came on tonight on the way home from work and I scanned it as soon as I got here. Anyways, I got 19 & 22 with key on/engine off. 19 says EEC Processor signal and 22 says BARO out of range. I have an idea as to what these mean, but does anyone know for sure what my car is trying to tell me? Thanks.

------------------
MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot

93CobraR · 01-29-2001, 07:21 PM

Heres what I found:
CODE: 19 (KOEO) - EEC Voltage Failure
Engine: 5.0L
Year: 86-93
Description:
Failure in EEC processor internal voltage

CODE: 22 (KOEO) - MAP/BP out of Self-Test range
Engine: 5.0L
Year: 86-93
Description:
MAP/BP out of Self-Test range
Dunno if that helps but it narrows it down a little more.

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 13.012
Best MPH 104
Best 60' 1.816

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

gt93mustang · 01-29-2001, 07:39 PM

Thanks 93CobraR - That was a much better description than the one I gave. Hopefully someone will be able to help out. I am praying that I don't have to buy a new computer. The Baro sensor probably isn't all that much though.

01-29-2001, 07:03 PM	#1
gt93mustang Registered Member Join Date: Feb 1999 Location: Kennesaw, Georgia, USA Posts: 252	Pulled codes 19 & 22... My check engine light came on tonight on the way home from work and I scanned it as soon as I got here. Anyways, I got 19 & 22 with key on/engine off. 19 says EEC Processor signal and 22 says BARO out of range. I have an idea as to what these mean, but does anyone know for sure what my car is trying to tell me? Thanks. ------------------ MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pulled codes...what do they mean?	Hethj7	Windsor Power	8	06-12-2003 12:03 PM
Pulled intake and swapped fuel rails now getting codes.	Rebel79	Windsor Power	3	09-03-2002 12:13 AM
pulled codes and could use some advice	Conman	Windsor Power	9	08-17-2002 06:41 PM
Pulled codes today...	bobtodd	Windsor Power	24	08-08-2002 07:55 PM
Pulled Codes from Car, Need Help!	StreetStang37	Windsor Power	11	09-24-2001 05:58 AM

01-29-2001, 07:21 PM	#2
93CobraR Registered Member Join Date: Oct 1999 Location: Cincinnati, Ohio Posts: 1,575	Heres what I found: CODE: 19 (KOEO) - EEC Voltage Failure Engine: 5.0L Year: 86-93 Description: Failure in EEC processor internal voltage CODE: 22 (KOEO) - MAP/BP out of Self-Test range Engine: 5.0L Year: 86-93 Description: MAP/BP out of Self-Test range Dunno if that helps but it narrows it down a little more. ------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 13.012 Best MPH 104 Best 60' 1.816 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html

01-29-2001, 07:39 PM	#3
gt93mustang Registered Member Join Date: Feb 1999 Location: Kennesaw, Georgia, USA Posts: 252	Thanks 93CobraR - That was a much better description than the one I gave. Hopefully someone will be able to help out. I am praying that I don't have to buy a new computer. The Baro sensor probably isn't all that much though.