Re: Pulled Codes, Please Help
It's pretty simple, just unbolt it from the intake and spray some carb cleaner or some throttle body spray into it and dry to wipe it out with something like a q-tip. Just be sure to let it dry before you hook it back up. Also make sure you have the right temp. t-stat. That or your coolant temp sensor in the intake manifold may be bad, they are usually less than $15. Can you tell I work in a parts store....
__________________
95 GT convertable, ported+polished GT40 heads, port matched upper and lower Cobra intake manifold, Flowthech headers, Catco hi-flow h-pipe with 2 hi-flow cats, Mac true fit catback exhaust, 3.73 gears, underdrive pullies, Edelbrock 70mm throttle body, Mac cold air intake, FMS 24lb injectors, Granatelli 75mm mass air
|