pulley install

93GTDIN · 09-11-2001, 08:13 PM

how do i install pullies in my 93 GT?

fiveohpatrol · 09-12-2001, 01:23 PM

im assuming since you are saying pulley's then you got the set of three, alternator, water pump & crank
the alternator pulley can be kinda tricky, you have to either grip the pulley really well and wrench the center nut off, or grip the pulley and get an impact to get it off, the easiest way is with an impact
the waterpump pulley is on with 4 bolts, its inbetween the fan clutch and waterpump, the 4 bolts are 3/8 or 5/16 i believe, this one is pretty easy to do, besides cutting your arms on the fan shroud

the crank pulley isn't hard either, its on with 4 bolts as well, my set came with new bolts for it
a couple notes: dont forget to put loc-tite on all bolts, also leave the serpentine belt until you get everything loose, this way the pulleys wont spin as much on you as your loosening them
good luck with it, it shouldnt take too long

------------------
88 Notch, B&M Ripper, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframes, 65mm TB, March ram air ,MSD coil, U/L control arms, 155lph f/p, Crane Adj.FPR, Nitto drag radials, best 1/4--> 13.76@101.4 on a 2.17 60ft

09-11-2001, 08:13 PM	#1
93GTDIN Registered Member Join Date: Jan 2001 Location: Live music capital of the world, TX Posts: 324	pulley install how do i install pullies in my 93 GT?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with blower pulley install	7up	Windsor Power	2	07-06-2002 11:45 AM
Battery is dead after pulley install?!?	Stang_Crazy	Windsor Power	16	02-07-2002 09:39 PM
Help with Pulley Install	Stang_Crazy	Windsor Power	6	10-29-2001 05:37 PM
Underdrive pulley install	CaliJ1	Modular Madness	2	09-26-2001 06:06 PM
Pulley install is a ***$$$####@@!	bark3rd	Modular Madness	6	05-25-2001 04:52 PM

09-12-2001, 01:23 PM	#2
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	im assuming since you are saying pulley's then you got the set of three, alternator, water pump & crank the alternator pulley can be kinda tricky, you have to either grip the pulley really well and wrench the center nut off, or grip the pulley and get an impact to get it off, the easiest way is with an impact the waterpump pulley is on with 4 bolts, its inbetween the fan clutch and waterpump, the 4 bolts are 3/8 or 5/16 i believe, this one is pretty easy to do, besides cutting your arms on the fan shroud the crank pulley isn't hard either, its on with 4 bolts as well, my set came with new bolts for it a couple notes: dont forget to put loc-tite on all bolts, also leave the serpentine belt until you get everything loose, this way the pulleys wont spin as much on you as your loosening them good luck with it, it shouldnt take too long ------------------ 88 Notch, B&M Ripper, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframes, 65mm TB, March ram air ,MSD coil, U/L control arms, 155lph f/p, Crane Adj.FPR, Nitto drag radials, best 1/4--> 13.76@101.4 on a 2.17 60ft