Push Rod length

347powered · 03-09-2002, 09:41 PM

Anyone know what size of push rod need for my car? Just bought TF track heat heads, I know I have to measure them, but I haven`t got the tool to check the size I need. Just wanted to know if anyone would know what size I would need. Thanks for your time!!!

saywhenn94 · 03-10-2002, 09:17 AM

i'm pretty sure the track heat head is the same as the twisted wedge head, as far as the pushrod length goes. if so call Panhandle Performance they helped me when i had the twisted wedge heads. too bad i forgot what length they were and i sold the motor. here is thier # (850)265-9818 or www.panhandleperformance.com hope this helps

drudis · 03-10-2002, 08:01 PM

http://www.trickflow.com/product/prfeature_index.htm

They state ADD .500 to pushrod length. I just ordered 6.750 for my TFS TW heads, and measure out correctly.

These are TFS TW heads(stage-II ported), TFS stage1 cam, TFS intake, and 1.6rr's.

StripedStangLX · 03-10-2002, 09:00 PM

I just bought the track heat heads too and am in the same boat. However, I have the trick flow 1.7 roller rockers. Do they even make a difference regarding pushrod lenght?

03-09-2002, 09:41 PM	#1
347powered Registered Member Join Date: Feb 2002 Location: Lafayette In. Posts: 14	Push Rod length Anyone know what size of push rod need for my car? Just bought TF track heat heads, I know I have to measure them, but I haven`t got the tool to check the size I need. Just wanted to know if anyone would know what size I would need. Thanks for your time!!! __________________ 93 Lx tang, coast high performance 347 TF upper and lower,30lb injecters 70mm TB, 75 MAF, Tremec3550,3.73 gear.

03-10-2002, 09:17 AM	#2
saywhenn94 Registered Member Join Date: Feb 2002 Location: Warren, Mi. Posts: 50	re: pushrod length i'm pretty sure the track heat head is the same as the twisted wedge head, as far as the pushrod length goes. if so call Panhandle Performance they helped me when i had the twisted wedge heads. too bad i forgot what length they were and i sold the motor. here is thier # (850)265-9818 or www.panhandleperformance.com hope this helps __________________ 91 GT Convertable, 306, TFS TW heads, B41 cam, Holley Systemax, S-Trim, Bassani LT's, and Flo's

03-10-2002, 08:01 PM	#3
drudis Moderator Join Date: Dec 1999 Location: Livonia, MI, USA Posts: 1,194	http://www.trickflow.com/product/prfeature_index.htm They state ADD .500 to pushrod length. I just ordered 6.750 for my TFS TW heads, and measure out correctly. These are TFS TW heads(stage-II ported), TFS stage1 cam, TFS intake, and 1.6rr's. __________________ Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com

03-10-2002, 09:00 PM	#4
StripedStangLX Registered Member Join Date: Jan 2001 Location: Kintnersville, PA USA Posts: 38	I just bought the track heat heads too and am in the same boat. However, I have the trick flow 1.7 roller rockers. Do they even make a difference regarding pushrod lenght? __________________ 91 LX: Green/white stripes, TFS heads, intake, cam, and 1.7 rockers. BBK longtubes, off-road h-pipe w/ flowmasters.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Speed secret # 5	jim_howard_pdx	Windsor Power	37	11-15-2002 12:19 PM
push rod length ????	cop-coupe	Windsor Power	4	05-14-2002 04:25 PM
TFTW heads and push rod lengths?	Rev	Classic Mustangs	4	11-23-2001 07:50 AM
push rod length for a 351 head on a 302	John Cummins	Windsor Power	1	10-04-2001 06:22 AM
full length or standard length subframe connectors?	84stangLX	Windsor Power	4	04-23-2001 03:48 PM