MustangWorks.com : Ford Forums - View Single Post

NO SLO PK · 04-10-2001, 12:08 PM

I made a cold air intake with ABS pipe (ABS is black plastic). I connected the MAF to a flex hose. The flex then connected to a 90 degree section of ABS located in the fenderwell. At the end of the ABS was the Conical filter.

I also made a radiator overflow out of a straight section of ABS, end caps, and brass fittings. It looks good and works great!

------------------
Russ L
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

04-10-2001, 12:08 PM	#3
NO SLO PK Registered Member Join Date: Mar 1999 Location: Arcadia, CA, USA Posts: 731	I made a cold air intake with ABS pipe (ABS is black plastic). I connected the MAF to a flex hose. The flex then connected to a 90 degree section of ABS located in the fenderwell. At the end of the ABS was the Conical filter. I also made a radiator overflow out of a straight section of ABS, end caps, and brass fittings. It looks good and works great! ------------------ Russ L '91 LX Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.