Maybe it was an imaginary dyno.

Hey guys i went to the other place yestarday to get another dyno, and i got the same thine 281hp, i had the guy look over the car, we took off the intake and it had be ported and polished very much, the lower intake was also done, he did not want to get to deep into the engine, he said its very possible to pull that HP with looking at the intake and the other stuf i have on the car,he also said that the heads are stock but they probably are worked. thanks agian

hmmm
 

maybe i can see those kind of numbers with porting..... damn .....how much does that kind of thing cost?
maybe ill be able to break 210hp !!!!!!!!:)

if you are quite handy you can do it your self the guy told me, i could not believe that i was making that much power either, i mean i have
BBK longtubes,
Off road H
1 chamber Flows
BBK cold air intake
Blaster 3 Coil
Talor race wires
race plugs
shorter belt(no smog or ac pully)
and a adjustable fuel presure regulator.

Porting alone won't make those numbers...not with how small the factory valves are in those "E" series heads....unless larger valves were installed.
Can't you tell by just how the car runs?? With that much power it should be super obvious that work has been done.......
Traction should be a major problem at this point.

Traction lol, you mean like when i stop and take off i normally just take off in 2nd because if i take of in first and get on it forget about it. it really does sound alot mean then most stangs i hear. i will post a sound and motor pic for you guys i just have to figure out how.
Ernie

Well....there's no doubt about it now.....there's definatly been some work done.
See my signature below? If I'm going less than 25mph in 1st and punch it, I get instant cloud of tire smoke....and that's with an automatic.
I'd say your engine has some mods done somewhere.

thats alot of dyno runs................i smell something fishy here:confused:

Surley it does not ahve the stock E6's on it :eek:

hey blue i just wanted to make sure that the numbers were right at the first place i went to. 2 to 3 dynos is not alot

BINGO!! we have a winner here!!

I said that a long time ago.

didn't see that!


eeh102582: is your name eric or is the guy you got the car from named eric??

hey mike, no the guy i got the car from his name is dan ,

I think it's safe to say now that this car is not stock. The only way to tell exactly what's been done to it is tearing it down.

Either your mechanic is retarded or you are misleading us.

Taking off in 2nd gear proves nothing I did my burnouts in second when I was stock.

I you sure his name wasnt Eric:p