question about slicks

82 GT · 08-14-2004, 01:47 PM

What the largest size slick that will fit under a stock Foxbody without any modifications?
I'm getting ready to buy a set.

GhOsT6_9 · 08-14-2004, 04:09 PM

Not sure of the largest, but I'm running a 275/50 DR in my stock fenders right, thats roughly a 26x10.5 slick. On very large bumps the outside fender lip will rub, since they aren't rolled back yet.

Ieatcamaros · 08-14-2004, 09:05 PM

What size wheel are you using and what backspacing is it?

82 GT · 08-15-2004, 03:43 AM

I'll probably be using either the GT turbines or LX 10 holes(15x7)
I found out that 26x9 slicks will mount on a 7inch mustang rim.

08-14-2004, 01:47 PM	#1 (permalink)
82 GT Import Slayer Join Date: May 1999 Posts: 2,237	question about slicks What the largest size slick that will fit under a stock Foxbody without any modifications? I'm getting ready to buy a set. __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.

08-14-2004, 04:09 PM	#2 (permalink)
GhOsT6_9 Registered Member Join Date: May 2000 Location: Ontario,Canada Posts: 233	Not sure of the largest, but I'm running a 275/50 DR in my stock fenders right, thats roughly a 26x10.5 slick. On very large bumps the outside fender lip will rub, since they aren't rolled back yet. __________________ 1989 Mustang LX Notch 5.0L, T-5, 1969 351W heads, cut & welded stock plenum, F-303 cam, Mac 1 5/8 full length headers, Cat'd H-pipe, 3.73 gears, Underdrives, SSM lift bars, E-Fan, 3G Alt, Custom Chip, Autometer gauges, Weld Draglite wheels , M/T ET Street Radials Best 1/4: 13.33@101.53MPH

08-14-2004, 09:05 PM	#3 (permalink)
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	What size wheel are you using and what backspacing is it? __________________ The sig says it all.

08-15-2004, 03:43 AM	#4 (permalink)
82 GT Import Slayer Join Date: May 1999 Posts: 2,237	I'll probably be using either the GT turbines or LX 10 holes(15x7) I found out that 26x9 slicks will mount on a 7inch mustang rim. __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
thinkin about gettin slicks	stanger9219	Modular Madness	3	08-19-2004 03:55 PM
What size slicks?	Chris_H	Windsor Power	4	08-31-2003 05:54 PM
Slicks + Suspension = .6 off 1/4 mile....new track times	84LX89GT	Stang Stories	6	05-14-2003 09:59 AM
simple question	Lonzo	Classic Mustangs	3	09-10-2002 10:37 AM
Newby here, I have a question on Odometers	mustangmama	Blue Oval Lounge	3	03-03-2001 06:43 AM

Sponsored Links