Question for Procharger and Supercharger guys.

gt93mustang · 04-12-2001, 06:35 PM

Hey everyone, I bought a Procharger yesterday with an 8lb pulley. How do all of you guys with Prochargers like them and how much boost do you run? I am currently making 290hp to the wheels, how much gain will I see with 8 lbs of non-intercooled boost? Thanks in advance.

------------------
MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot

NO SLO PK · 04-12-2001, 08:14 PM

With premium gas, I'd estimate 90-110 hp.

------------------
Russ L
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

[This message has been edited by NO SLO PK (edited 04-12-2001).]

Rick 91GT · 04-12-2001, 11:25 PM

THE BOOST IS LOOSE

Awesome 93, did you get that air meter deal worked out yet?

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

gt93mustang · 04-13-2001, 11:27 AM

Hey Rick! Good to hear from you. How is your car coming along? Still shooting for the weekend of the 20th?

The meter? Well, I am still using the 73mm because I haven't been able to get the 76mm to work.

Oh, and the Procharger! I am so psyched. I'll eventually upgrade to the intercooler and pump up the boost, but I'll have a 331ci motor by that time and I'll be making some serious power then. As for now, I think I'll be happy with 400rwhp, but probably not for long. We all know how that is.

------------------
MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot

Rick 91GT · 04-13-2001, 01:10 PM

Still shooting for that weekend but I don't think I am going to make it and I'm not going to rush through things. All the interior is in except the new headliner, it hasn't showed up yet, I also need to add the roll bar padding. THe black carpet looks very nice, almost everything is new inside. I am still working on the heads, I may get them done tonight and tomorrow. We will fly cut early next week and I plan on having the motor together and everyhting elses on all the new MSD and stuff by the 21st, then I have to concentrate on getting my T-5 back together, I just ordered all the parts from D&D they will be here mid next week. I am so excited to be putting it all back together and get it running I am starting to go through Mustang withdraw..and it's getting bad I need my fix. The reason I haven't been on the Chat room lately is because I have been bustin butt on the stang at night for 7 hours or so, I have been checking in but it is after 11:30PM EST. That Procharger would have really liked that Fully ported Saleen

. My bodduy still not sure about the intake but I'll let you know.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

04-12-2001, 06:35 PM	#1
gt93mustang Registered Member Join Date: Feb 1999 Location: Kennesaw, Georgia, USA Posts: 252	Question for Procharger and Supercharger guys. Hey everyone, I bought a Procharger yesterday with an 8lb pulley. How do all of you guys with Prochargers like them and how much boost do you run? I am currently making 290hp to the wheels, how much gain will I see with 8 lbs of non-intercooled boost? Thanks in advance. ------------------ MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FMU and Supercharger Pulley Question	NitroNixon	Windsor Power	3	05-14-2003 08:06 PM
Question about cam and supercharger	DRASTiK	Windsor Power	6	01-31-2003 11:27 AM
One more Question about buying a Pro-M??? :) For a supercharger!!	RedCobra/95	Windsor Power	3	03-24-2002 09:03 PM
Gear and supercharger question	Yan88gt	Windsor Power	2	07-18-2001 07:31 PM
Powerdyne Supercharger for 87 GT without AC question	gramsch	Windsor Power	1	05-06-2001 02:58 PM

04-12-2001, 08:14 PM	#2
NO SLO PK Registered Member Join Date: Mar 1999 Location: Arcadia, CA, USA Posts: 731	With premium gas, I'd estimate 90-110 hp. ------------------ Russ L '91 LX Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles. [This message has been edited by NO SLO PK (edited 04-12-2001).]

04-12-2001, 11:25 PM	#3
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	THE BOOST IS LOOSE Awesome 93, did you get that air meter deal worked out yet? ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

04-13-2001, 11:27 AM	#4
gt93mustang Registered Member Join Date: Feb 1999 Location: Kennesaw, Georgia, USA Posts: 252	Hey Rick! Good to hear from you. How is your car coming along? Still shooting for the weekend of the 20th? The meter? Well, I am still using the 73mm because I haven't been able to get the 76mm to work. Oh, and the Procharger! I am so psyched. I'll eventually upgrade to the intercooler and pump up the boost, but I'll have a 331ci motor by that time and I'll be making some serious power then. As for now, I think I'll be happy with 400rwhp, but probably not for long. We all know how that is. ------------------ MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot

04-13-2001, 01:10 PM	#5
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	Still shooting for that weekend but I don't think I am going to make it and I'm not going to rush through things. All the interior is in except the new headliner, it hasn't showed up yet, I also need to add the roll bar padding. THe black carpet looks very nice, almost everything is new inside. I am still working on the heads, I may get them done tonight and tomorrow. We will fly cut early next week and I plan on having the motor together and everyhting elses on all the new MSD and stuff by the 21st, then I have to concentrate on getting my T-5 back together, I just ordered all the parts from D&D they will be here mid next week. I am so excited to be putting it all back together and get it running I am starting to go through Mustang withdraw..and it's getting bad I need my fix. The reason I haven't been on the Chat room lately is because I have been bustin butt on the stang at night for 7 hours or so, I have been checking in but it is after 11:30PM EST. That Procharger would have really liked that Fully ported Saleen . My bodduy still not sure about the intake but I'll let you know. ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!