questions about nitrous jets

spankaveli · 11-11-2002, 08:19 PM

zex kit only goes up to 125....is it possible to buy jets from nos to get the zex kit up to a 150 shot?

thanks

Moxie · 11-12-2002, 03:35 PM

I doubt it, since NOS and ZEX are competitors. Even if the jets work, NOS is not going to give you any tech help with a ZEX kit. Try contacting ZEX directly.

chris91LX · 11-12-2002, 04:49 PM

You have to use the Nitrous Express jets, and I was told by Zex you can jet it up to a 200 shot. You can work out the jets you need by looking at the jets for the 75, 100 and 125, they increase and decrease at a set rate for the jet sizes.

Bluefox91LX · 11-13-2002, 12:39 PM

call the ZEX techline and ask the jetting size for your shot. i use edelbrock jets on my kit, they are fine.

NewAge 5.0 · 11-13-2002, 01:19 PM

depending on the size of the solonoid your only gonna flow so much through it. you can buy 200hp jets but most the smaller solonoids may only flow enough for 150-175 range?? if the kit is entry level NOS it probably maxed out at that range CompUCar maxed out at about 200. dont compromise the TUNE on your motor for more JUICE the NOS solonoid might flow enuff but what if the gas doesnt

11-11-2002, 08:19 PM	#1
spankaveli Registered Member Join Date: Aug 2002 Location: Gonzales, Louisiana Posts: 153	questions about nitrous jets zex kit only goes up to 125....is it possible to buy jets from nos to get the zex kit up to a 150 shot? thanks __________________ Old car - 87 LX Pics New car - 02 WRX Pics & Mods

11-12-2002, 04:49 PM	#3
chris91LX Registered Member Join Date: Oct 1998 Location: Suburban Chicago, Hanover Park Posts: 695	You have to use the Nitrous Express jets, and I was told by Zex you can jet it up to a 200 shot. You can work out the jets you need by looking at the jets for the 75, 100 and 125, they increase and decrease at a set rate for the jet sizes. __________________ My Ford Club http://www.midwestfords.org/ Best time N/A 12.9 @ 107 1.711 60' 125 shot - 12.04 @ 113 1.59 60'

11-13-2002, 01:19 PM	#5
NewAge 5.0 Registered Member Join Date: Mar 1999 Location: Sanford NC USA Posts: 155	depending on the size of the solonoid your only gonna flow so much through it. you can buy 200hp jets but most the smaller solonoids may only flow enough for 150-175 range?? if the kit is entry level NOS it probably maxed out at that range CompUCar maxed out at about 200. dont compromise the TUNE on your motor for more JUICE the NOS solonoid might flow enuff but what if the gas doesnt __________________ 88 Hatch 10.60's @ 130 89 Hatch Not as fast but holds its own

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
94 GT nitrous questions...	kwik50gtgt	Power Adders	4	01-12-2004 04:48 PM
Nitrous jetting questions	byrnech	Windsor Power	3	09-23-2002 10:10 PM
a few nitrous beginner questions	fiveohpatrol	Windsor Power	5	05-14-2002 10:34 PM
Nitrous Questions for 99GT	Swarzkopf	Modular Madness	8	01-08-2002 10:16 AM
WET Nitrous questions...	Skyman	Windsor Power	9	06-23-2001 02:41 AM

11-12-2002, 03:35 PM	#2
Moxie Registered Member Join Date: Aug 2000 Location: Plymouth, MI Posts: 254	I doubt it, since NOS and ZEX are competitors. Even if the jets work, NOS is not going to give you any tech help with a ZEX kit. Try contacting ZEX directly.

11-13-2002, 12:39 PM	#4
Bluefox91LX Registered Member Join Date: Sep 2002 Posts: 70	call the ZEX techline and ask the jetting size for your shot. i use edelbrock jets on my kit, they are fine.