© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
11-23-2002, 11:05 AM | #1 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
T-5 to C-4 question...few questions
I might be trading the C-4 from my '82 for a T-5 out of a 91GT.
Will we both be able to use the same driveshaft or will we have to trade them also? Also, will that guy need to change the computer in his '91 for one from an automatic. If I remember correct, I think I used the same drive shaft when I went to a 5 speed to the C-4 but I want to make sure. One more question: Will he be able to still use his stock crossmember. ( told him he should be able to)
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
11-23-2002, 12:05 PM | #2 |
Registered Member
Join Date: Nov 2001
Location: Fall River, MA
Posts: 467
|
I can't help much, but I just wanted to point out that it is a bit confusing trying to figure out which tranny is going into what car.
You might need to clear that up for someone to help you.
__________________
'02 Explorer XLT 4.0L --Nice Vehicle '97 Saturn SL1--Soon to be ditched for a Ford! |
11-23-2002, 02:28 PM | #3 | |
Get down.....
Join Date: Apr 2001
Location: Room 103
Posts: 2,095
|
Re: T-5 to C-4 question...few questions
Quote:
he does not need to change his computer. thier is a way to fake the computer in thinking it is a 5 speed. let me find out what that is and i will get back to you on that. the crossmember i am not sure. i have heard people modifying the 5 speed one, but again not sure.
__________________
Cobra brakes are on! Finally..... ------------------------------------------------ |
|
11-23-2002, 03:56 PM | #4 |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
Let me try to clear this up a bit.
I might be swapping my C-4 tranny for his T-5 tranny. First, I need to know if a T-5 driveshaft is the same length as a C-4 driveshaft.(if not, then I'll simply swap shafts also). Will my C-4 tranny work with his T-5 crossmember without modification? To sum it up: I'm putting the T-5 into my '82GT and he his putting the C-4 into his 91GT Does that help?
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
11-23-2002, 04:38 PM | #5 |
Get down.....
Join Date: Apr 2001
Location: Room 103
Posts: 2,095
|
i understood you the first time if your talking to me.
the crossmemeber should not be that big of a problem to modify if he has to. my buddy has a C4 in his 93 and i dont think he had to modify it that much.
__________________
Cobra brakes are on! Finally..... ------------------------------------------------ |
11-23-2002, 06:59 PM | #6 | |
Import Slayer
Join Date: May 1999
Posts: 2,241
|
Quote:
__________________
'82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Questions question questions!!!!!!! | Oldschoolpony | Windsor Power | 12 | 03-15-2006 02:37 AM |
simple question | Lonzo | Classic Mustangs | 3 | 09-10-2002 09:37 AM |
Questions from a first time engine builder | flyin 5.8 | Windsor Power | 3 | 07-09-2002 07:40 PM |
95-98 neb mustang questions?!?!?!?! | Isamu29 | Modular Madness | 3 | 04-29-2002 03:17 PM |
help I have questions | redhotrod | Windsor Power | 3 | 03-28-2001 03:04 PM |