MustangWorks.com : Ford Forums - View Single Post

johnmcgt · 10-08-2002, 07:34 PM

Hey all,

I finally got it in the air and did the deed. The hardest part was putting it in the air. I removed the 2 nuts, pulled the inner sleeves out of the rack and replaced the bushings.
Just that easy, probably 15 minutes of real work.

Thanks again for all the input

John

10-08-2002, 07:34 PM	#10
johnmcgt Registered Member Join Date: May 2002 Location: Florida Posts: 31	Finally got around to it Hey all, I finally got it in the air and did the deed. The hardest part was putting it in the air. I removed the 2 nuts, pulled the inner sleeves out of the rack and replaced the bushings. Just that easy, probably 15 minutes of real work. Thanks again for all the input John __________________ K&N: 2.5" Flows(3-chmbr) & Offroad H-Pipe: Underdrive Pullies: Eibach Pro springs: KYB shocks/struts: Pro3I C/C plates: