MustangWorks.com : Ford Forums - View Single Post

pete1 · 06-25-2001, 07:38 AM

Which is better a modine 3 core or an aluminum radiator with TWO 1 INCH CORES. Thanks

Here is the site that has these radiators. Thanks

http://cgi.ebay.com/ebaymotors/aw-cg...480903&r=0&t=0

------------------
Stock Heads, 24 LB Injectors, E303 Camshaft,*
Edelbrock Performer Efi Intake, H-pipe, 2 Chamber Flowmasters,75 Bullet Mass Air Meter, 65TB, Mac Cold Air Induction, Mac Chrome Headers, AOD TCI Street Fighter Transmission, Tci 3000 stall converter, Lentech Valve Body, 4.10 gears, Timing Set At 14, TPS Set at .98, 190 Walbro Fuel Pump, Fuel Pressure set at 41, Msd 6AL,*Dual Biondo Line Locks, 15x3.5 Weld Wheel On Front, 15x10 Welds On Rear with 26x9.5x15 Hoosier Quick time Pro Tires.

<A HREF

06-25-2001, 07:38 AM	#1
pete1 Registered Member Join Date: Sep 1999 Location: Radcliff, Ky U.S.A Posts: 202	radiator question Which is better a modine 3 core or an aluminum radiator with TWO 1 INCH CORES. Thanks Here is the site that has these radiators. Thanks http://cgi.ebay.com/ebaymotors/aw-cg...480903&r=0&t=0 ------------------ Stock Heads, 24 LB Injectors, E303 Camshaft,* Edelbrock Performer Efi Intake, H-pipe, 2 Chamber Flowmasters,75 Bullet Mass Air Meter, 65TB, Mac Cold Air Induction, Mac Chrome Headers, AOD TCI Street Fighter Transmission, Tci 3000 stall converter, Lentech Valve Body, 4.10 gears, Timing Set At 14, TPS Set at .98, 190 Walbro Fuel Pump, Fuel Pressure set at 41, Msd 6AL,*Dual Biondo Line Locks, 15x3.5 Weld Wheel On Front, 15x10 Welds On Rear with 26x9.5x15 Hoosier Quick time Pro Tires. <A HREF