RAnger to mustang rear axle

GodStang · 02-02-2003, 12:55 AM

What size rearend does a Ranger have? If it has an 8.8 what years will bolt to a 1994 mustang?

BLACK85GT · 02-02-2003, 01:39 AM

they have 7.5 rear.

WADS56 · 02-02-2003, 07:57 AM

The 4.0 ranger has a 8.8 in it. I'm not sure if it will fit though, i think it is a little different. It's offset or something because you can use two right ranger axles in a mustang 8.8, but the left ones will not work.

srv1 · 02-03-2003, 01:43 AM

Quote:

Originally posted by GodStang
What size rearend does a Ranger have? If it has an 8.8 what years will bolt to a 1994 mustang?

All Rangers have 7.5's unless it came with a 4.0 then it is an 8.8. none of these axles will work for your SN95. The only axles that will work are Stangs 94 and up. Also, does yours have ABS? The ranger axles are norrower. What are you trying to do? do you need a replacement? If you need a housing, the TBird Turbo coupes will work and 93 Cobra's will work. Just change the axles from a SN95 to those housings. SVO housings may work but the axleshafts will not. They are longer than the SN95's.

GodStang · 02-03-2003, 10:43 AM

I have a 7.5" right now. I am taking a couple of guys tips from here and taking an 8.8 housing and putting an 31 spline Aurburn pro diff, with 31 spine axles and 3.73 gears with the svo cover. Dropping a 351W into my car with in the year I hope need some strength.

02-02-2003, 12:55 AM	#1 (permalink)
GodStang College Stanger Join Date: May 1999 Location: Aiken,south carolina, usa Posts: 1,095	RAnger to mustang rear axle What size rearend does a Ranger have? If it has an 8.8 what years will bolt to a 1994 mustang? __________________ 2003 Sonic Blue Cobra www.ifitsfast.com www.stangbay.com tell them GodStang sent you!!

02-02-2003, 01:39 AM	#2 (permalink)
BLACK85GT Registered Member Join Date: May 2002 Location: Tampa,FLORIDA Posts: 340	they have 7.5 rear. __________________ 5.0, Holley heads, 1.7 Scorp Rockers, Stealth intake, Holley 600 carb, Holley Mech. Fuel pump, MSD 6Digital, MSD distributor, Hotchkis upper/lower rear control arms, FMS B Springs, 3:73 (8.8) rear. Production # 9,377

02-03-2003, 10:43 AM	#5 (permalink)
GodStang College Stanger Join Date: May 1999 Location: Aiken,south carolina, usa Posts: 1,095	I have a 7.5" right now. I am taking a couple of guys tips from here and taking an 8.8 housing and putting an 31 spline Aurburn pro diff, with 31 spine axles and 3.73 gears with the svo cover. Dropping a 351W into my car with in the year I hope need some strength. __________________ 2003 Sonic Blue Cobra www.ifitsfast.com www.stangbay.com tell them GodStang sent you!!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear axle bulid up?	GodStang	Windsor Power	12	01-24-2003 06:12 PM
Rear Brake Line Removal	Kisner	Classic Mustangs	2	03-13-2002 12:31 PM
1999 rear axle code?	bucky47	Small Ponies	1	01-18-2002 11:31 AM
Do Mustang rear bumbers warp in the sun? Please Look!!! Very important!!!	tireburner163	Blue Oval Lounge	17	01-17-2002 05:12 PM
Will 7.5" axle fit on 8.8"?	Fox Body	Windsor Power	7	02-23-2001 06:28 PM

02-02-2003, 07:57 AM	#3 (permalink)
WADS56 gear banger Join Date: Aug 2000 Location: CHICAGO Posts: 1,144	The 4.0 ranger has a 8.8 in it. I'm not sure if it will fit though, i think it is a little different. It's offset or something because you can use two right ranger axles in a mustang 8.8, but the left ones will not work.

Sponsored Links