© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
09-22-2002, 07:47 PM | #1 |
Registered Member
Join Date: May 2002
Location: New Jersey
Posts: 375
|
Ranting and Raving
(Short Version)
Why are people so stupid.... i don't get it. You can give a guy 250 dollars for a job and he screws it up. People suck. (Long Version) So i have my car for just over a year, doing some minor mods, all bolt on, nothing major. So as summer started i noticed a little smoke coming out my tailpipe. It got worse as time went on and low and behold i have a warped head. Car overheats, loses water etc etc.... I pull the heads off and take them to a local machine shop, he tests them and says there warped 11 thousands, which i was told was alot. He says 250 bucks for a magnaflus, fix the head and a valve job. So get the heads back, put them on and the car runs like ****. I do a compression check cylinders 1,2,3,4,6,7,8 all are good with about 125 pounds, cylinder 5 have 25 pounds of compression in it. Now i can only work on the car on sunday being as im in college 2 hours away from the car. So to get back and forth i have to take my parents car, which pisses them off. So now I'm without my stang another week until the guy charges me more to fix the heads again, i pay for more gaskets(again), and i drive home, again, to work on the car. Why can't people stop sucking and do what there paid to do the first time.
__________________
'89 LX 5.0, off-road h pipe, flowmaster muffs, underdrive pulleys, rebuilt WC T-5, King Cobra Clutch, 65mm throttle body, Explorer Upper/GT40 lower, Lakewood Rear Lift Bars. 76mm C&L Mass air w/ inlet pipe, Twisted wedge heads w/ stage 2 port,polish, MAC equal length shorties, Billet AFPR, 255LPH fuel pump, fresh low end w/ 10.5:1 compression. If anyone ever wants to go to Raceway Park in Englishtown New Jersey, give me a shout. RICER HATERS CLUB MEMBER 87! www.ricehatersclub.com |
|
|