MustangWorks.com - The Ford Mustang Power Source!

Go Back   The Mustang Message Board > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Reply
 
LinkBack Thread Tools Rate Thread Display Modes
Old 06-09-2004, 10:55 AM   #1 (permalink)
leathal injection
Registered Member
 
Join Date: Mar 2004
Location: Long Island
Posts: 58
Default rattling noises comming from my bell housing

whats up guys, about a month ago i installed a tremmic 3550, on my 90 5.0. when taking my clutch off i noticed a few of the springs we loose ??? not really loose , but if i shook it i would hear a little rattling . i didnt have the dough for a whole new clutch, so i just got my pad relined. when i took my pad to get relined i asked the clutch shop if that rattling is normal , an he said ya thats ok...

Now just a couple of days ago i noticed a rattling noise comming from underneath the car. but only at low RPMs when i would hit the gas it would go away i thought my exhuast was just rubbin on somthing, i took my car to my friends shop jacked it up, and the rattling is comming from my bell !! could those clutch springs have gotten a looser ? and if it did do i have to replace the whole clutch ? i thought also maybe a clutch bolt fell out ? but wouldnt my car vibrate alot if that was the case ??? any suggestions would be great ! thanks

-dave
__________________
1990 Mustang GT

Engine- 308 (bored .40 over) Probe Forged pistons (10.5:1), Scat forged crank and rods, w/Main Girdle, AFR 185 heads, GT-40 intake, CSI electric water pump. AC delete kit, No smog pump, Manual rack and pinion steering.

Ignition- MSD 6AL, MSD Blaster coil, MSD hellicore wires.

Drive Train- Tremic 3550, Alum. Drive shaft, 3:73 gears, Stock carrier and axels. 26X11.5 M/T Et streets.

Power adder- 175 shot of laughing gas.

Best ET 11.5 @120mph on squeeze, 12.4 @109mph on muscle (on gt40 heads)

on the 185 heads ... ??? tba
leathal injection is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 06-09-2004, 10:35 PM   #2 (permalink)
codybear
Registered Member
 
Join Date: Sep 2003
Posts: 63
Default

Does it go away with the clutch in?
codybear is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
bell housing for tremec COBRA66 Windsor Power 0 12-20-2002 04:00 PM
need help with c4 bell housing wes hall Windsor Power 2 12-06-2001 11:42 PM
C-4 Bell Housing? john_86stang Windsor Power 0 02-16-2001 09:15 PM
Bell Housing 4 T56 trany St_Brawler Modular Madness 3 06-20-2000 01:35 PM


All times are GMT -5. The time now is 09:04 PM.


SEARCH